
3To close the door, check that the internal covers are in place (see “Replacing the internal covers” on page 13), and then swing the door toward the front of the chassis until the latch locks.
4See “After closing the computer” on page 3.
Removing the internal covers
Complete the following steps to access the components inside the chassis by removing the internal covers (PCI door, thermal divider, and power supply baffle):
1Open the access door. See “Accessing the chassis through the access door (left side)” on page 3.
2Open the PCI door by moving the latch (K) to the left, and then swinging the door open. If necessary, lift up the door to remove it from the hinges.
L
K |
M