HP Blackbird 002-01A Gaming System manual Removing and Replacing the Power Supply

Page 49

Removing and Replacing the Power Supply

Removing the power supply

1Prepare the computer to be opened, and then open the left access door, open and remove the PCI door, remove the thermal divider, and remove the power supply baffle. See “Opening and Closing the Computer” on page 1.

WARNING: Remove the power cord from the computer. Failure to do so before removing the power supply can result in personal injury or equipment damage.

2Inside the chassis, note the location of each plug connected to the power supply and label the cable. Press the latch (A) on each plug, and then pull the plug from the connector.

A

A

WARNING: If you disconnect the power connector for the liquid cooling system, ensure that it is reconnected prior to connecting power and turning on the computer. Failure to do so may result in damage to the cooling system and to the computer.

Upgrading and Servicing Guide 45

Image 49
Contents Upgrading and Servicing Guide USA Table of Contents Iv Table of Contents Opening and Closing the Computer Safety InformationBefore opening the computer Preparing the computerAfter closing the computer Accessing the chassis through the access door left sideUpgrading and Servicing Guide To remove the exterior door inlay when replacing it Upgrading and Servicing Guide To remove the door from the chassis hinges To place the door on its hinges Replacing the access doorTo install an inlay JI H Removing the internal covers Upgrading and Servicing Guide Replace the PCI door Replacing the internal coversAccessing the chassis through the right side Upgrading and Servicing Guide To open the right access panel Upgrading and Servicing Guide To place the panel on its hinges Replacing the right side accessInsert three screws P to secure the panel To install an inlay UV W Locating Components Inside the Computer Removing an optical drive Removing and Replacing DrivesUpgrading and Servicing Guide Upgrading and Servicing Guide Removing a full-size optical disc drive Upgrading and Servicing Guide Adding or replacing a slim optical disc drive Adding or replacing an optical driveF1 F2 Upgrading and Servicing Guide Adding or replacing a full-size optical disc drive Upgrading and Servicing Guide Removing the hard disk drive Adding or replacing a hard disk drive Memory Dimm Adding MemoryRemoving a memory module Installing a memory module Upgrading and Servicing Guide Removing an add-in card Removing and Installing an Add-in CardUpgrading and Servicing Guide Upgrading and Servicing Guide Installing an add-in card Upgrading and Servicing Guide Upgrading and Servicing Guide Removing the power supply Removing and Replacing the Power SupplyUpgrading and Servicing Guide Replacing the power supply C D E I H G F Removing the Sata backplane Removing and Replacing the Sata BackplaneLocate the Sata backplane B on the right side of the chassis Upgrading and Servicing Guide Replacing the Sata backplane Upgrading and Servicing Guide Replacing the Battery
Related manuals
Manual 16 pages 57.99 Kb Manual 28 pages 10.62 Kb Manual 1 pages 24.03 Kb Manual 164 pages 22.11 Kb Manual 8 pages 12.77 Kb Manual 1 pages 50.38 Kb