HP Blackbird 002-01A Gaming System Configuring audio output, Configuring the audio card software

Configuring audio output

You can configure your speaker audio output by using the following software. Use the software that applies to your computer model:

￿Creative Sound Blaster X-Fi or X-Fi Fatality Speaker Settings Configuration (audio card)

￿Windows Media Center (all systems)

Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio card

This section provides an overview of configuring and recording with the Creative Sound Blaster X-Fi or X-Fi Fatality audio card (select models).

Configuring the audio card software

After you have installed and connected the speakers, follow these steps to configure multichannel audio output for computers:

NOTE: Three modes are available; Entertainment Mode is selected here. For information about the other modes, see “Sound Blaster X-Fi configuration modes.”

1Click the Windows Start Button on the taskbar.

2Point to All Programs.

3Click Creative, Sound Blaster X-Fi, and then click Creative Console Launcher.

4The Entertainment Mode window opens. If a different mode displays, click the Mode button, and then select Entertainment Mode.

5Click the Windows Start Button , All Programs, Creative, and then Creative Console Launcher.

6 Click the Speakers button.

Configuring Speaker and Sound Options 57