HP 410 Copier manual Use the configuration tab, Clean the printheads

Page 31

use printing features

clean the printheads

Use this feature when the self-test report, which is generated from the front-panel, shows streaking or white lines through any of the colored bars. Do not clean printheads unnecessarily; this wastes ink and shortens the life of your printheads.

Tip: Although this feature is available in the Device Services tab, we recommend that you use the front-panel instead.

1In the Device Services tab, click Clean the Printheads.

2On the next screen, click Clean.

A test page will print, and a dialog box will appear with the options Intermediate Clean or Done.

–If the print quality on the test page is poor, click Intermediate Clean.

–If the print quality on the test page is good, click Done.

If you select Intermediate Clean, a new test page will print and a new screen will appear with the options, Prime or Done.

–If the print quality is poor, click Prime.

–If the print quality on the test page is good, click Done.

If you select Prime, a new test page will print and a new screen will appear with the options Clean Again or Done. Select Clean Again if further cleaning is needed, or click Done.

3When you are finished, click Close.

print a test page

This tool allows you to confirm that the connection between your HP Digital Copier Printer and your computer is working properly. This test page is different than the self-test report that you can print from the front-panel.

`In the Device Services tab, click Print a Test Page.

The test page prints as long as your connection is working properly.

use the configuration tab

The Configuration tab allows you to specify the way your HP Digital Copier Printer is set up. It also allows you to configure the copier/printer to conserve energy by automatically running in power-saving mode after it has not been used for a certain amount of time.

Note: The following options are permanently disabled, because they are not available with the HP Digital Copier Printer 410:

–Display Print Settings Confirmation Dialog

–Display Status Window

–Configure Status Messages

–Attempt to Use Hardware ECP

access the configuration tab

1Right-click the printer icon in the system tray, make sure hp digital copier 410 is marked with a checkmark, and then select Open the hp digital copier 410 Toolbox.

The HP Digital Copier 410 Toolbox appears. It contains two tabs. By default, the Toolbox opens to the Device Services tab.

2Click the Configuration tab.

printing guide

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Printing guide Hp digital Copier printerSafety information Contents Hp digital copier printer About this guide Set up printingInstall your hp digital copier printer software Before you install the softwareInstall on Windows 98, 98SE, Me, or Install on Windows XP Add a printer Open the printer properties dialog box Uninstall and reinstall softwareOpen the toolbox Load paper Load paper and envelopesRecommended papers Papers to avoid when printing Load postcards or hagaki cards Load envelopesSlide the envelope on the top until it stops Tips for loading other types of paper Load photo paperPaper Tips 6 photo paper Set the paper type and sizeAre closest to you Change print settings Make the hp digital copier printer the default printerHp digital copier printer Increase print speed or quality Use the quality tabSelect paper type Print using hp digital photographyPaper, glossy, and then set the paper size on Papers Paper-type settingLayout tab accordingly Restore factory defaults Print using high resolutionUse the layout tab Print borderless photos Select paper sizeScale a document’s size Reverse an image for iron-on transfers Change the page orientationRotate a document to print envelopes Print on both sides Use the features tabSet the number of copies Print the last page firstPrint a poster Print multiple pages on a single sheetPreview your document before printing Adjust the ink volume and dry time Use the advanced featuresPrint in grayscale Use the color tabUse the hp toolbox Use the device services tabChange the saturation, brightness, or color tone Clean the printheads Use the configuration tabCancel from the computer Cancel from the front-panelStop a print job Hp digital copier troubleshooting tips Troubleshooting helpPrinting problems Cause Solution Hp digital copier printer is not responding Nothing happens when I try to printLast page of my document did not print Ink is not filling the text or graphics completely Meaningless characters printPrintout is faded or colors are dull Text edges are jagged Printout has horizontal streaksColors are bleeding into each other Printout is fuzzy or blurryText or graphics are cut off at the edge of the paper Margins are not printing as expected Cause SolutionBlank page came out while printing Drop-down menus are empty Problems printing bannersPrintout is slanted or skewed Envelopes are not printing correctlyHp digital copier printer error messages Paper sizes Type Size Technical informationMode Resolution dpi Speed ppm Print specificationsType Size Envelopes Print margin specificationsCards Additional specifications Physical specificationsPower specifications Environmental specificationsNumerics IndexShirt transfer load Page Q1645-90109 Q1645-90109
Related manuals
Manual 64 pages 36.16 Kb Manual 1 pages 9.08 Kb

410 Copier specifications

The HP 410 Copier stands out as a reliable and efficient solution for both home and office printing needs. Designed to cater to various printing requirements, the HP 410 encapsulates advanced technology and user-friendly features, making it a preferred choice for users across different sectors.

One of the standout features of the HP 410 Copier is its impressive printing speed. Capable of delivering up to 30 pages per minute (ppm), this copier reduces wait times for users, thereby enhancing productivity. In addition to speed, the HP 410 also ensures high-quality prints, with an optimized resolution that produces sharp and clear text documents, as well as vibrant images.

Another significant characteristic of the HP 410 Copier is its ability to handle a variety of paper sizes. From standard letter and legal sizes to envelopes and custom-sized media, the copier showcases versatility that appeals to diverse printing tasks. Moreover, the automatic duplex printing feature allows for double-sided printing, saving both time and paper, contributing to more sustainable practices.

In terms of connectivity, the HP 410 offers robust wireless capabilities. Users can easily connect to the copier through Wi-Fi or Bluetooth, allowing for seamless printing from smartphones, tablets, and other mobile devices. This feature is complemented by HP’s Smart App, which enables remote management and monitoring of print jobs, further facilitating user convenience.

The design of the HP 410 Copier is both compact and ergonomic, fitting comfortably in smaller workspaces without sacrificing functionality. The intuitive control panel simplifies navigation, enabling users to access crucial settings and functions effortlessly.

When it comes to technology, the HP 410 leverages innovative LaserJet technology, which stands out in providing consistent performance and reliability. This technology ensures that even during high-demand periods, the copier maintains efficient operation without compromising quality.

In summary, the HP 410 Copier combines speed, versatility, and top-notch connectivity features, making it a valuable addition to any office environment. Its user-centric design and advanced laser printing technology make it an excellent choice for those looking to optimize their printing tasks while ensuring high-quality results. Whether for professional or personal use, the HP 410 proves to be a dependable partner in productivity.
Top Page Image Contents