HP 315EU Power Conservation, Energy Saver, System Environmental, Specs, Ambient Air Operating

QuickSpecs

Compaq 315eu MT PC (EMEA only)

System Details

Power Supply	ATX Power Supply - Passive PFC/non-PFC with a 115v/230v line switch
	Passive Power Factor Correction (PFC) - with line switch set to 230V - No PFC in 115V line
	switch position
	90 to 140VAC, or 180 to 264VAC operating voltage range
	100 to 127VAC, or 200 to 240VAC rated voltage range
	50-60 Hz rated line frequency
	47-63 Hz operating line frequency range
	180 watt maximum rated power
	80-mm power supply fan - variable speed for optimum acoustics
Power Conservation	APM 1.2 support
'Energy Saver'	Screen blanking
	Hard drive 'Idle' mode
	System Idle mode
	~2 watt power consumption in ES mode - suspend to RAM (S3) (instantly available PC)
	Processor/Cache memory power-down (S3)
	Eup Lot 6 - less than 1W with BIOS setup option (Max power savings)
System Environmental	Values are subject to change without notification and are for reference only.
Specs	Performance of system, options, and ancillary equipment will vary depending on the system
	configuration.
	Levels presented do not account for non-HP/Compaq installed hardware.
	Ambient Air	Operating	32° to 104° F (0° to 40° C) at sea level with an
	Temperature		altitude de-rating of 1.0°C per every 1000 ft
			(300 m) above sea level to a maximum of
			8000 ft (2500 m), no direct sustained sunlight.
			Maximum rate of change is 77°F/Hr (25°C/Hr).
			The upper limit may be limited by the type and
			number of options installed.
		Storage	-22° to 149° F (-30° to 65° C)
			Maximum rate of change: 410°F/Hr
			(210°C/Hr).
	Humidity	Operating	10% to 90% relative humidity (Rh), 86°F
			(30°C) maximum wet bulb temperature, non-
			condensing.
		Storage	10% to 95% relative humidity (Rh), 101.66°F
			(38.7°C) maximum wet bulb temperature,
			non-condensing.
	Altitude	Operating	0 to 10,000 feet (0 to 3048 meters) - This
			value may be limited by the type and number
			of options installed. Maximum allowable
			altitude change rate is 1,000 ft/min (304.8
			m/min).
		Non-Operating	0 to 30,000 feet (0 to 9,144 meters) -
			Maximum allowable altitude change rate is
			1200 ft/min (365.76 m/min).
	Shock	Listed are the levels of shock the product can withstand with NO
		damage being incurred. The values represent peak input acceleration
		during a 2 to 3 ms half-sine shock pulse, 11 ms trapezoidal shock pulse.
		Non-Operating	35G's (Half-sine Shock)
			35G's (Trapezoidal Shock)
	Vibration	Listed are the levels of vibration the product can withstand with NO
		damage being incurred. The values represent a flat random vibration
		input acceleration profile across the given frequency range.

DA - 13686 Worldwide QuickSpecs — Version 3 — 7.23.2010 Page 7