General, Inspection, Reference | York F3EH090 instruction

INSTALLATION MANUAL

SPLIT-SYSTEM HEAT PUMPS

INDOOR UNITS

Supersedes: 515.41-N2Y (692)/035-09651-000	035-09651-001-A-0304

MODELS F3EH090 & F4EH120

(50 and 60 Hz)

GENERAL

These completely assembled indoor units include a well- insulated cabinet, a copper tube/aluminum fin coil, throw- away filters, a centrifugal blower, a blower motor, an adjust- able V-belt drive, a blower motor contactor and a small holding charge of an inert gas. They also include a filter- drier, an expansion valve and a distributor that are only used during the cooling cycle plus a check valve to provide the proper flow of refrigerant through the coil during both the cooling and heating cycles.

Supplemental resistance heaters, a supply air plenum, a return air grille and a base are available as accessories for field instal- lation.

The units are shipped in the vertical position ready for field in- stallation. For horizontal installation, reverse the solid bottom panel and the return air duct flange on the front of the unit.

All forms referenced in this instruction may be ordered from:

Standard Register

Toll Free Tel.: 877-318-9675

Toll Free Fax: 877-379-7920

Installer should pay particular attention to the words: NOTE, CAUTION and WARNING. Notes are intended to clarify or make the installation easier. Cautions are given to prevent equipment damage. Warnings are given to alert the installer that personal injury and/or equipment damage may result if the installation procedure is not handled properly.

INSPECTION

As soon as a unit is received, it should be inspected for possi- ble damage during transit. If damage is evident, the extent of the damage should be noted on the carrier's freight bill. Asepa-

REFERENCE

This instruction covers the installation of the indoor unit. For in- formation on the installation and operation of the matching out- door unit, refer to Form 035-15410-002.

Renewal Parts:

•Refer to Parts Manual for complete listing of replacement parts on this equipment.

CAUTION

THIS PRODUCT MUST BE INSTALLED IN STRICT COMPLIANCE WITH THE ENCLOSED INSTALLATION INSTRUCTIONS AND ANY APPLICABLE LOCAL, STATE, AND NATIONAL CODES INCLUDING, BUT NOT LIMITED TO, BUILDING, ELECTRICAL, AND MECHANICAL CODES.

WARNING

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR ASSISTANCE OR ADDITIONAL INFORMATION, CONSULT A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER.

F3EH090 specifications

The York F3EH090 is a high-efficiency, versatile air conditioning unit designed for residential and light commercial applications. This model is part of the York F3 series, recognized for its advanced engineering and innovative technologies that cater to modern climate control requirements.

One of the main features of the F3EH090 is its energy efficiency. With a high Seasonal Energy Efficiency Ratio (SEER) rating, this unit is engineered to deliver superior cooling while minimizing energy consumption. This not only helps in reducing utility bills but also contributes to a lower carbon footprint, making it an environmentally friendly choice.

In terms of design, the F3EH090 boasts a compact and stylish profile, making it suitable for various installation locations. The unit is equipped with a robust compressor that ensures reliable performance across different weather conditions. The compressor operates quietly, providing a comfortable indoor environment without disruptive noise levels.

The F3EH090 incorporates advanced technologies, including a microprocessor controller that optimizes system performance. This controller monitors various parameters and adjusts operation settings to maximize efficiency and comfort. Additionally, the unit features variable-speed fan motors, which allow for customized airflow levels and enhance overall comfort.

Another significant characteristic of the York F3EH090 is its ease of installation and maintenance. The design allows for straightforward access to components, simplifying routine maintenance tasks. This feature is particularly valuable for service technicians and homeowners alike, as it reduces downtime and contributes to the longevity of the system.

The durability of the F3EH090 is further enhanced by its corrosion-resistant coating, which protects the unit from harsh weather conditions. This feature ensures that the air conditioner remains operational and efficient over its lifespan.

Furthermore, the York F3EH090 is compatible with various smart home technologies, allowing users to integrate the unit into their home automation systems. This compatibility enables remote monitoring and control, promoting convenience and energy savings.

In summary, the York F3EH090 stands out with its impressive energy efficiency, advanced technologies, and ease of maintenance. Designed with modern needs in mind, this air conditioning unit is an excellent choice for anyone looking to enhance their indoor comfort while ensuring environmental sustainability.