Troubleshooting
Problems
Power LED doesn't light up.
No screen image
Abnormal colors are present
The image bounces or a wave pattern is present
The screen image is not centered or the size is incorrect
Possible solutions
∙Check if the power switch is in the ON position
∙Make sure the power cord is properly connected
∙Check if the power switch is in the ON position
∙Make sure the power cord is properly connected
∙Make sure the signal cable is securely connected
∙When the display is in use, it will automatically turn off to enter the power saving mode. Please press any key to see if the image resumes.
∙Please refer to the "Color Temperature" section to adjust the RGB color or select a color temperature.
∙Remove any electrical device that may be causing electrical interference.
∙Check the signal cable and make sure the pins are not bent.
∙Press the Auto button to automatically optimize the display status.
∙Refer to the "Image Control section".
16