HP 10 Removal and replacement procedures, Tablet component replacement procedures, Back cover

Page 18

5Removal and replacement procedures

Tablet component replacement procedures

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 13 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes internal shielding)

739004-001

 

 

10.1-in TouchScreen display panel assembly

739005-001

NOTE: The display panel assembly spare part kit does not included the display panel cable. The display panel cable is included in the Cable Kit, spare part number 746637-001.

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

12

Chapter 5 Removal and replacement procedures

Image 18
Contents HP 10 Tablet Product notice Software termsSafety warning notice Iv Safety warning notice Table of contents Page Product description Category Description Ports Power requirementsServiceability End user replaceable part AC adapter SecurityExternal component identification Illustrated parts catalog Locating the serial number, product number, and model numberTablet major components Component Spare part number Back coverWebcamera Kit , includes Miscellaneous parts Sequential part number listingSequential part number listing Removal and replacement preliminary requirements Service considerationsTools required Grounding guidelines Electrostatic discharge damagePackaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelBack cover Removal and replacement proceduresTablet component replacement procedures Description Spare part numberPage Battery Speakers Board Power button board Page System board Page Page Rear-facing webcamera Front-facing webcamera Specifications Backing up and recovering your data Back up and resetUpdating apps, widgets, and the operating system Factory data reset Requirements for specific countries and regions Power cord set requirementsRequirements for all countries Country/region Accredited agency Applicable note numberPower cord set requirements Recycling Index Jacks
Related manuals
Manual 61 pages 15.08 Kb