CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
1.Place the tablet on a flat surface, display panel side down, with the power button toward you.
CAUTION: When inserting the plastic tool into the tablet as described in Step 2, make sure not to insert the tool into the power button area. Failure to follow this caution can result in damage to the tablet.
2.Insert a thin, plastic tool (1) between the back cover and the display panel assembly. The first insertion point should be the tablet corner between the power button (2) and the micro SD Card Reader slot (3) and SIM slot.
CAUTION: When removing the back cover, make sure the tablet edge containing the micro SD Card Reader slot and SIM slot is the first edge released. Failure to follow this caution can result in damage to the tablet.
3.Lift the left edge of the tablet (4) unit it rests at an angle.
4.Remove the back cover (5).
Reverse this procedure to install the back cover.
CAUTION: When installing the back cover, make sure the bottom edge, opposite the micro SD Card Reader slot and SIM slot, is the first edge installed. Failure to follow this caution can result in damage to the tablet.
Back cover | 13 |