HP RX4610 manual I2000 Workstation

	Introduction and Related Information
	Hardware Configurations
Server	rx4610 - a 2-4 way IPF-based server
Processors	733MHz/2MB
	733MHz/4MB
	800MHz/4MB
Memory	64GB max memory using 32 SDRAM DIMM sockets
	per memory expander board
Drives	DVD drive (IDE)
	Floppy drive LS-120 (IDE) slim line
	2 hot swap 1" Hard Disk Drives 18GB each, total 36GB
PCI I/O	10 PCI slots - 8 66MHz slots, 2 33MHz slots

Supported Add-On Peripherals

A5272A - Sure Store E Disk System SC10

A5236A(z) - Sure Store E Disk System FC10

A5950A - Sure Store E Disk Array XP512

A5700A - Sure Store E Disk Array XP256

A5920A - Sure Store E Disk Array XP48

A5277A - Sure Store E Disk Array FC60

A5616A - Sure Store E Disk System HVD 10

C4318B - Smart Storage Enclosure (DDS4)

C6369A/71A - DDS4 Tape Drive

A5617A - 10/180 Tape Library

A5598A - 9840 Tape Drive

A5599A - DLT8000 Tape Drive

A5583A(HVD) - 2/20 Tape Library

Supported Add-On Cards

A5150A -Dual Port Ultra2 SCSI

A5159A -Dual Port FWD SCSI-2

A4926A - PCI 1000BaseSX Gigabit Ethernet Fiber, single port

A4929A - PCI 1000BaseT Copper Gigabit Ethernet A6792A - PCI 100BaseT

A5158A - Single Port Fibre Channel (Tachlite)

i2000 Workstation

The Itanium-based workstations are available in two configurations, the i2000 733MHZ is a single processor system with 2MB Cache, and 1, 2, or 4GB memory, and the i2000 800MHZ is a dual processor system with 2MB Cache, and 2 or 4GB memory.

Chapter 1 21