Planning your HP-UX 11i Version 1.5 Cold Install

Installing HP-UX 11i Version 1.5

Planning your HP-UX 11i Version 1.5 Cold Install

to target 0.

•Once installed, the VxVM root disk can not be moved to another SCSI bus or address that results in a change in the hardware path to the device. If it is moved, you may not be able to boot sanely from it. This is similar to the limitation present in LVM.

Step 14. Specify root disk volume group disks. In this step you will specify how many disks you want placed into the root disk volume group and whether or not you would like the disks to be striped. (The HP-UX Install Wizard describes these features in depth.)

Step 15. Select language(s). Browse the available languages, marking the desired selections.

Step 16. Select the user license. In this step you will select the type of user license you wish to install on your system. This information does not have to be exact, but should represent what you believe to be the primary usage of your system. A minimal two-user license is denoted here. To load licenses for more than two users, you must use the Application DVD.

Step 17. Select additional software. In this step you may select any additional software which you would like loaded onto your system. Browse the list, marking your selections, then continue to the next step.

Step 18. Pre-Install check information, Step 1. There are two steps involved in the pre-install checks. The ﬁrst is to identify which disks will be overwritten during the install process. If you see disk in the list that you do not want included, back up to the root disk selection and choose another disk.

Otherwise continue on to the next step.

Step 19. Pre-Install check information, Step 2. The second step in the pre-install check is to review any errors or warnings. Warnings are simply informational. If there are any errors, they will need to be resolved before the installation can continue.

Step 20. System summary. At this point you have successfully deﬁned your system. Use the show summary button to view a summary of how your system will be conﬁgured. If you see any problems, or wish to change any of your selections, feel free to back up to the appropriate step, and make the needed changes. Otherwise, select Finish (at the bottom of the tabs). You have the chance to Cancel at this time. If you cancel, you return to the previous conﬁguration screen.

Step 21. Next, the installation will begin with ﬁlesets being copied from the

Chapter 2