HP 2410 Load paper, Connect phone cord, Turn HP PSC on, Align print cartridges, Install software

Page 2

1

Macintosh Users START HERE

This side of the poster is for Macintosh users. Make sure you are using the correct side of the poster and CD for your operating system.

2 Attach front panel cover

aRemove any packaging material.

bPlace the front panel cover over

the buttons. Firmly press on all sides to snap the cover in place. Make sure all the buttons are visible.

cLift the display.

3 Load paper

Use blank white paper to prepare for print alignment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a

 

b

c

 

d

 

4 Connect phone cord

aYou must connect the

supplied phone cord to the

phone jack on the left

(1-LINE).1-LINE

b To connect an answering machine or use your own phone cord, see the Fax Setup chapter in the Reference Guide.

Connect power cords

c

a

b

6 Connect USB cable

Do not connect the USB cable into a keyboard.

 

7

Turn HP PSC on

 

 

 

aTurn power on.

bWait for the print cartridge message to appear, and then continue to the next step.

all-in-one

8

Insert print cartridges

 

 

9 Align print cartridges

Press OK on the front panel to begin alignment. After a page prints, alignment is complete. Discard or recycle this page.

setup poster

2400 photosmart series

aMake sure the power is on. Lift the print carriage door up until it catches. Lift the blue and gray latches.

bRemove the bright pink tape from both print cartridges. Do not touch the gold-colored contacts or retape the cartridges.

cHold the black print cartridge with the HP logo on top. Slide the cartridge underneath the metal bar into the right (gray latch) side of the print carriage.

dPress down on the gray latch until it locks into place. Insert the color cartridge on the left side, and lock into place.

Tri-ColorBlack

eMake sure both latches are locked into position. Close the door.

Macintosh

hp psc

10 Install software

aTurn on your Macintosh and wait for the desktop to appear. Insert the

HP PSC Macintosh CD.

bDouble-click the HP All- In-One Installer icon in your folder.

cFollow the onscreen instruction. Make sure you complete the Setup Assistant.

11 Congratulations!

You are ready to begin using your HP device. See the Reference Guide to get started. Have fun!

Image 2
Contents Connect supplied phone cord Begin software installationAttach front panel cover Connect USB cableConnect phone cord Install softwareLoad paper Turn HP PSC on
Related manuals
Manual 334 pages 7.87 Kb