Q3083 - 90188 |
1 | Windows Users START HERE | 2 | Turn your computer on |
a Turn on your computer and wait for
|
| the Windows desktop to appear. |
This side of the poster is for | b | Close any open programs. |
|
| |
Windows users. Make sure |
|
|
you are using the CD and side |
|
|
of the poster that matches your |
|
|
operating system. |
|
|
3 Begin software installation
a Insert the HP PSC Windows CD.
b Follow the onscreen instructions.
If the software does not appear on your computer screen after inserting the CD, see the Troubleshooting Information chapter in the Reference Guide.
cDo not connect the USB cable yet. When you see the
Setup your Device Now dialog box, continue to step 4.
series all-in-one
4 Attach front panel cover
a Remove any packaging material.
b Place the front panel cover over the buttons. Firmly press on all sides to snap the cover in place. Make sure all the buttons are visible.
c Lift the display.
7 Connect supplied phone cord
aYou must connect the supplied phone cord to the phone jack on the left
|
b To connect an answering machine or use your own phone cord, see the Fax Setup chapter in the Reference Guide.
5 | Load paper |
| Use plain white paper to |
|
|
|
| |||||
|
|
|
|
|
|
| prepare for print alignment. |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a | b | c | d |
8 Connect USB cable
Make sure that you see the screen in step 3 before plugging in your USB cable. Do not connect the USB cable to a keyboard.
6 | Connect power cords |
| c |
| a |
| b |
9 | Turn HP PSC on |
aTurn power on.
bWait for the print cartridge message to appear, and then continue to the next step.
poster photosmart
10 Insert and align print cartridges
11 Finish software installation
Windows setup hp psc 2400
a | Make sure the power is on. Lift | b | Remove the bright pink tape from |
|
| ||
| the print carriage door up until |
| both print cartridges. Do not |
| it catches. Lift the blue and |
| touch the |
| gray latches. |
| or retape the cartridges. |
c | Hold the black print cartridge with the | d | Press down on the gray latch |
|
| ||
| HP label on top. Slide the cartridge |
| until it locks into place. Insert |
| underneath the metal bar into the right |
| the color cartridge on the left |
| (gray latch) side of the print carriage. |
| side, and lock into place. |
e | Make sure both latches are | f | Press OK on the front |
|
| ||
| locked into position. Close |
| panel to begin alignment. |
| the door. |
| After a page prints, |
|
|
| alignment is complete. |
|
|
| Discard or recycle this |
|
|
| page. |
aHardware setup is complete. Return to your computer. On the dialog box with the green checkmark, click Next. Depending on your system, it may take 20 minutes or more to finish installing the software.
bAfter you restart your computer, the Fax Setup Wizard appears. Follow the onscreen instructions. When you see the Congratulations! dialog box, you are ready to use your HP PSC. If you encounter any problems during setup, see the Reference Guide.
Copyright |
|
www.hp.com/support | Printed in US. |