HP 1410v Attach the control panel overlay if not attached, Connect the power cord and adapter

Page 2

4 Attach the control panel overlay (if not attached)

aBend the bottom of the control panel overlay.

bRemove the bottom tab and the backing from the overlay.

cLift the lid. Attach the overlay to the device.

dPress down on the overlay to ensure it is ﬁrmly attached.

CAUTION: The control panel overlay must be attached for the HP All-in-One to work!

Important: Do not connect the USB cable until instructed later in this guide.

2 • HP All-in-One

Image 2

Contents Remove all tape and components Locate componentsConnect the power cord and adapter Attach the control panel overlay if not attachedRemove tape from both cartridges Load plain white paper Open access doorPress the On/Resume button Insert the tri-color print cartridge Insert the black print cartridgeChoose the correct CD Align the print cartridgesTurn on your computer Connect the USB cable Finish software installation TroubleshootingControl Panel Overview Q7286-90216

Related manuals

Manual 64 pages 29.31 Kb