HP 1410xi, 1402, 1410v manual Press the On/Resume button, Load plain white paper Open access door

Page 3

6 Press the On/Resume button

On/ Resume

After you press the On/Resume button, the green light blinks, and then becomes solid. This may take up to a minute.

7

 

Load plain white paper

 

 

1

 

 

2

3

4

 

 

 

 

 

 

 

 

CAUTION: To avoid paper jams, do not force paper too far into the tray.

8 Open access door

Lower the access door until it stops. Make sure the print carriage moves to the center.

The device must be On before you can insert the print cartridges.

9 Remove tape from both cartridges

Pull the pink tab to remove the tape from both print cartridges.

CAUTION: Do not touch the copper-colored contacts or retape the cartridges.

HP All-in-One • 3

Image 3
Contents Locate components Remove all tape and componentsAttach the control panel overlay if not attached Connect the power cord and adapterLoad plain white paper Open access door Press the On/Resume buttonRemove tape from both cartridges Insert the black print cartridge Insert the tri-color print cartridgeAlign the print cartridges Turn on your computerChoose the correct CD Connect the USB cable Troubleshooting Finish software installationQ7286-90216 Control Panel Overview
Related manuals
Manual 64 pages 29.31 Kb