HP PRINT/SCAN/Copier 380 manual Use the best print cartridge for the job, Insert the cartridge

Use the best print cartridge for the job
To print…	Insert this print cartridge in the
	cartridge cradle
Full-color photos	HP Tri-color (7 ml)
	HP Tri-color (14 ml)
Black-and-white photos	HP Gray Photo
Sepia or antique photos	HP Tri-color (7 ml)
	HP Tri-color (14 ml)
Text and colored line drawings	HP Tri-color (7 ml)
	HP Tri-color (14 ml)

Caution Check that you are using the correct print cartridge. HP cannot guarantee the quality or reliability of non-HP ink. Printer service or repairs required as a result of printer failure or damage attributable to the use of non- HP ink will not be covered under the limited warranty.

For best print quality, HP recommends that you install all retail print cartridges before the date stamped on the box.

Insert or replace the print cartridge

Remove the pink tape

Do not touch here

Prepare the printer and cartridge

1.Make sure the power is on and you have removed the cardboard from inside the printer.

2.Open the print cartridge access door of the printer.

3.Remove the bright pink tape from the cartridge.

Insert the cartridge

1.If you are replacing a cartridge, push down and pull outward on the cartridge in the cradle to remove it.

2.Hold the replacement cartridge with the label on top. Slide the cartridge at a slight upward angle into the

HP Photosmart 380 series Reference Guide 13