Troubleshooting
You can
•C:\Program Files\Hp\Digital maging\bin\hpqtra08.exe.
•C:\Program Files\Hp\Digital Imaging\bin\hpqscnvw.exe or hpiscnapp.exe.
•C:\Program Files\Hp\Digital Imaging\bin\hpqdstcp.exe.
Tip: Configure your firewall software to allow communication over UDP port 427.
Step 4: Use the advanced search feature.
1.Print a network configuration report using the following instructions:
1.Press button next to Scan.
2.Press button next to Wireless Menu.
3.Press button next to Wireless Settings.
4.Press button next to Print Network Configuration Page.
2.Identify the IP address of the HP Photosmart from the network configuration report.
3.Use the advanced search option available during software installation, then click on Search by IP address and enter the product’s IP address.
English
Other network problems after software installation
If the HP Photosmart has been successfully installed, and you are experiencing problems such as not being able to print, try the following:
•Turn off the router, product, and computer, and then turn them back on in this order: router first, then the product, and finally the computer. Sometimes, cycling the power will recover a network communication issue.
•If the previous step does not solve the problem and you have successfully installed the HP Photosmart Software on your computer, run the Network Diagnostic tool.
To run the Network Diagnostic tool
>In the Solution Center, click Settings, click Other Settings, and then click Network Toolbox. On the Utilities tab, click Run Network Diagnostics.