Chapter 3
To prepare the printer and cartridge
1.Make sure the printer is on.
2.Open the print cartridge door of the printer.
3.Remove the bright pink tape from the cartridge.
English
Figure 3-1 Remove the pink tape
Figure 3-2 Do not touch here
To insert the cartridge
1. If you are replacing a cartridge, push down and pull outward on the cartridge in the cradle to remove it.
2. Hold the replacement cartridge with the label on top. Slide the cartridge at a slight upward angle into the cradle so the
3. Close the print cartridge door. The camera screen shows an icon with the approximate ink level for the installed print cartridge. No
4. Load HP Advanced Photo Paper in the input tray, press Menu/OK, and then follow the onscreen instructions to align the cartridge.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information see www.hp.com/go/inkusage.
14 HP Photosmart A440 series