United States Stove 2020L installation manual GAS Pressure Check, GAS Inlet

Page 13

GAS CONNECTION, CONTINUED...

 

The gas inlet connection is 3/8" NPT, made at the top of the

GAS INLET

control cover inside the access door of the mantel. Run gas

 

line from the gas supply to the connection. A flex pipe

 

connector is suggested for easy connection.

 

Test all gas joints from the gas meter to the heater for leaks

 

using soap and water solution after completing connection.

 

DO NOT USE AN OPEN FLAME.

 

FIGURE 6. Flex Pipe Connected to control

GAS PRESSURE CHECK

The heater regulator controls the burner pressure which should be checked at the pressure test point located on the front of the main control and is accessible by removing the control panel on the right side of the heater.

The pressure should be checked with the heater burning and the control set to high (HI).

The pressure regulator is preset and locked to avoid tampering. If the pressure is not as specified in Product Specifications (Page 5), contact your dealer and replace the regulator.

The appliance and its individual shutoff valve must disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (35 kPa).

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents ~WHAT to do if YOU Smell GAS United States Stove CompanyLocal Codes Table of ContentsPage Min BTU/Hr Burners SpecificationsFireplace TOP View Fireplace Front View Fireplace Side View Locating Fireplace Product FeaturesAIR for Combustion and Ventilation Unusually Tight Construction Providing adequate ventilationConfined Space and Unconfined Space Determining if You Have a Confined or Unconfined Space Ventilation AIR Mantel Clearances for Conventional Installation InstallationMinimum Wall and Ceiling Clearances see Figure Screen Removal Minimum Clearances to CombustiblesGas Connection GAS ConnectionGAS Inlet GAS Pressure CheckProper Installation Sequence LOG AssemblyLOG Positioning For Your Safety For Your Safety Read Before LightingOperating Instructions What to do if YOU Smell GASTurn OFF GAS to Appliance Lighting InstructionsTurn off heater and allow to cool before cleaning Cleaning / ServicingMatch Lighting Instructions Checking Flame AppearanceFlames Flame AppearanceParts Diagram and Parts List KEY Description QTY Assembly Parts ListBlower KIT, and Wiring Diagrams Optional Accessories Wiring of the RCK60 Remote Control KIT Standard Wiring from FactoryWiring with the WTK60 Wall Thermostat KIT Wiring with the WSK60 Wall Switch KIT Page Page Page Ussc

2020L specifications

The United States Stove Company has a long-standing history of providing quality heating solutions, and the 2020L model continues that tradition. The 2020L is a versatile wood-burning stove, designed to deliver efficient heating while enhancing the aesthetic appeal of any space.

One of the main features of the 2020L is its impressive heating capacity. It can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger living areas or homes in colder climates. The stove boasts a high-efficiency rating, which means it maximizes fuel use while minimizing waste. This allows users to enjoy longer burn times and a more consistent heat output.

The 2020L integrates advanced technologies to enhance its performance. A notable feature is the secondary combustion system, which significantly increases efficiency by burning off gases and particulates that would otherwise escape through the flue. This not only contributes to reduced emissions but also improves the overall heat output of the stove. Additionally, the stove employs a durable cast iron construction, ensuring longevity and resilience against the rigors of daily use.

Another characteristic that sets the 2020L apart is its user-friendly design. The large glass door provides an expansive view of the fire, adding a cozy ambiance to any room. The air wash system keeps the glass clean for unobstructed views, enhancing the visual appeal while reducing maintenance needs. The adjustable dampers offer precise control over airflow, allowing users to customize the burn rate and heat level according to their preferences.

Moreover, the 2020L is designed with safety in mind. It features a built-in heat shield that helps to protect surrounding walls from excessive heat, allowing for more flexible installation options. The stove also meets stringent EPA guidelines, ensuring it's an environmentally responsible choice for homeowners seeking to reduce their carbon footprint.

In summary, the United States Stove 2020L wood-burning stove is a powerful, efficient, and aesthetically pleasing option for heating large spaces. Its combination of advanced technologies, ease of use, and safety features positions it as a reliable choice for anyone looking to invest in a quality heating solution. Whether for supplemental heat or as the primary source, the 2020L brings both functionality and beauty to the heart of your home.
Top Page Image Contents