HP 2610xi, 2613, 2610v manual A2 Connect the USB cable, A3 Go to on

Page 8

A2 Connect the USB cable

Windows Users:

a You may have to wait several minutes before you see the onscreen prompt to connect the USB cable. Once the prompt appears, connect the USB cable to the port on the back of the HP all-in-one, and then to any USB port on your computer.

If you do not see these screens, see

Troubleshooting in the last section.

Macintosh Users:

a Connect the USB cable from your computer to the USB port on the back of the device.

b Double-click the HP All-in-One installer icon.

cMake sure you complete all screens, including the Setup Assistant. You must select USB. Also, you must click the Print Center button to add the HP all-in-one to your printer list.

b Follow the onscreen instructions to complete the Fax Setup Wizard and Sign up now screens.

A3 Go to step 17 on page 11.

8 • HP all-in-one

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Start Here Remove all tape Locate componentsLoad plain white paper Attach the control-panel overlay if not attachedLift the color graphics display Press the On button Connect the power cord and adapterConnect the supplied phone cord Insert the tri-color print cartridge Open access doorRemove tape from both cartridges Turn on your computer Insert the black print cartridge Align the print cartridges USB Connection Ethernet Wired NetworkChoose ONE connection type a or B Section a USB connection A1 Insert the correct CDA2 Connect the USB cable A3 Go to onSection B Ethernet Wired Network Connect the Ethernet cableB2 Choose the correct CD Set up additional computers optional CongratulationsTroubleshooting
Related manuals
Manual 241 pages 30.18 Kb Manual 34 pages 57.17 Kb
Top Page Image Contents