HP 7410 Open access door, Remove tape from both cartridges, Insert the tri-color print cartridge

10 Open access door

a Lift the access door.

b Press down and lift up the green and black latches on the inside of the HP all-in-one.

11 Remove tape from both cartridges

Pull the pink tab to remove the tape from both print cartridges.

Do not touch the copper-colored contacts or retape the cartridges.

12 Insert the tri-color print cartridge

Make sure the device is ON before continuing.

a Hold the tri-colorprint cartridge with the HP label facing up.

b Place the tri-colorprint cartridge in front of the left slot.

c Push the cartridge firmly into the slot until it stops.

4 • HP all-in-one