4
a
Attach the control-panel overlay (if not attached)
b | a Align the tabs of the control panel |
| overlay with the device, and then |
| lower. |
b Press down firmly on all edges and
in the center of the overlay until it snaps into place.
The
5 Load plain white paper
a Insert the bottom paper tray. | b Slide the paper adjuster over. | c Insert paper. |
d Insert the top (output) tray. | e Pull, and then flip the tray extender out. |
6 Connect the power cord and adapter | |
| Important: Do NOT connect the USB |
| cable until Step 16 or software may not |
| install properly. |
2• HP