HP 6210xi, 6210v, 6215 Align the print cartridges, Turn on your computer, Insert the correct CD

Page 5

13 Align the print cartridges

a Press OK at each of the prompts on the control panel to start print cartridge alignment.

The alignment may take a few minutes.

b After the page prints, alignment is complete. Check the display for the status, and then press OK. If it fails, see Troubleshooting in the last section.

Recycle or discard the alignment page.

If you are not connecting the device to a computer, continue to the Fax Setup chapter in the User Guide for information on how to finish fax setup.

14 Turn on your computer

a Turn on your computer, login if necessary, and then wait for the desktop to appear.

b Close any open programs.

15 Insert the correct CD

Windows Users:

a Insert the HP all-in-one Windows CD.

b Follow the onscreen instructions.

If the startup screen does not appear, double-click My Computer,double-click the CD-ROMicon, and then double-click setup.exe.

Macintosh Users:

Insert the HP all-in-one Macintosh CD. Go to the next step before installing software.

5 • HP all-in-one

Image 5
Contents Locate components Remove all tape and inside lockLoad plain white paper Connect the power cord and adapterAttach the control-panel overlay if not attached Connect the supplied phone cord Open access doorPress the On button Remove tape from both cartridgesInsert the black print cartridge Insert the tri-color print cartridgeInsert the correct CD Align the print cartridgesTurn on your computer Connect the USB cable Congratulations Continue software installationTroubleshooting