Smeg SCB60GX, SCB60MFX5, SCB60GB Mounting the rear top skirtboard where applicable, Wall fixing

Models: SCB60MFB SCB60MFB5 SCB60GB SCB60MFX5 SCB60GX SCB60MFX

1 28
Download 28 pages 36.63 Kb
Page 13
Image 13
4.5Mounting the rear top skirtboard (where applicable)

Instruction for the installer

4.5Mounting the rear top skirtboard (where applicable)

Loosen nuts B.

Position the skirt above the top, taking care to align pins C with holes D.

Secure the skirt to the top by tightening screws A.

4.6Wall fixing

Stretch out the chain attached to the cooker horizontally so that the other end touches the wall.

Mark the wall in the position where the hole is to be drilled.

Drill the hole, insert the finned dowels and attach the chain.

Move the cooker up against the wall.

4.7Positioning and levelling of the appliance

Having carried out the electricity and gas hook-up, level the appliance using the four adjustable legs. For best cooking the appliance must be perfectly level.

Depending on the model you have purchased, the foot height adjustment range may vary from 70 to 95 mm and from 110 to 160 mm. These heights refer to the distance between the highest point of the foot (fixed part) and the lowest point (movable part which rests on the floor).

15

Page 13
Image 13
Smeg SCB60GX Mounting the rear top skirtboard where applicable, Wall fixing, Positioning and levelling of the appliance