HP 6110xi Step, Insert the print cartridges, Install the software, Try your new HP OfficeJet

Page 2

*Q1636-90181* *Q1636-90181*

Q1636-90181

1

Make sure you are using the correct side of the poster.

See your box for exact contents and system requirements. Windows users: See other side.

3Step 3 continued

Use blank white paper to prepare for print alignment.

ATTACH THE ADF TRAY EXTENSION

Slide the automatic document feeder (ADF) tray extension into the top of the unit. Match the gray tabs with the black slots.

4

2

Attach the cover

3 Remove output tray and load paper

ab

a Insert the two tabs of the cover into the

a

 

top slots on the unit.

b

Tilt the cover down and press firmly.

 

 

 

Make sure the tabs lock into place and

 

b

the cover is even with the unit.

c

Connect the USB cable

5 Connect the power cord and phone cord

 

6 Turn on your HP OfficeJet

 

1 To wall jack

2

To phone

 

3

 

 

d

7Insert the print cartridges

Make sure to remove any packing material from inside the unit.

g

If you have an iMac, your USB port is on the side. Do not connect the HP OfficeJet to a

 

2

 

USB port on a keyboard or non-powered USB hub. See reference guide for more details.

 

 

 

c Black label (56)

setup poster series all-in-one

a

e

b

d

Color label (57)

fg

6100

aLift the print carriage door up until it catches. Wait for the print carriage to move to the center. Lift the blue and gray latches.

 

 

c

Hold the black print cartridge with the label on top as shown.

 

 

 

 

 

Slide the cartridge into the right (gray latch) side of the print

e

 

b

Remove the bright pink tape from

 

carriage.

Pull the end of the gray latch toward you, press

 

 

the print cartridge. Do not touch the

d

Hold the color print cartridge with the label on top as shown.

down until it stops, and then release. Make sure

 

gold-colored contacts or retape the

 

the latch catches below the bottom tabs.Repeat

 

Slide the cartridge into the left (blue latch) side of the print

 

 

cartridges.

 

with blue latch.

 

 

 

carriage.

 

 

fMake sure both latches are locked into position. Close the door.

gPress Enter to begin alignment. After a page prints, alignment is complete. Discard or recycle this page.

Macintosh hp officejet

8Install the software

aTurn your Macintosh on and wait for your Macintosh to finish starting up. Insert the HP OfficeJet software CD.

bDouble-click the HP All- In-One Installer icon on your desktop.

9

cFollow the onscreen instructions. You may have to restart your Macintosh during setup. Be sure to

complete the setup assistant.

Try your new HP OfficeJet

Note: See the reference guide for adjusting the display viewing angle.

Whats next?

Take the product tour

Use the Director

Click the reference guide for other ways to get started with your HP OfficeJet.

Image 2
Contents Attach the ADF tray extension Finish software setupSet up faxing and take Product Tour Attach the cover Remove output tray and load paperInsert the print cartridges Install the softwareStep Try your new HP OfficeJet
Related manuals
Manual 88 pages 48.35 Kb