Trouble Shooting

Replacement of Glass

1.Remove the door from the stove and place on a flat surface.

2.Carefully remove all of the glass clips from the inside of the door.

3.Gently remove the glass panel and gasket.

4.Using a wire brush, remove all remaining debris from the glass area.

5.Apply a small bead of gasket/stove cement and the new gasket. Do not overlap the ends of the gasket rope.

6.Center the new glass panel over the gasket and reinstall the glass clips.

7.It may be necessary to retighten the glass clips after the stove has be burned and the gasket has been seated.

Important:

1.It is extremely important to tighten the glass clips slowly and in an alternating pattern.

2.Always wear protective gloves when you handle glass with sharp edges.

Replacing parts

Always use genuine replacement parts. Only ever make replacements when the stove is cold.

Surface Finish

The stove should only be cleaned using a damp cloth. Some cleaning products may leave stains on the stove surface. Never use abrasive cloths as these may scratch the surface. Painted stoves can be re-painted by using a good quality, high temperature stove paint. When re-painting, make sure there is plenty of ventilation and follow the manufacturer’s instructions. Allow the paint to fully dry before lighting the stove and allow extra ventilation for the first couple of fires as some fumes may emit from the stove as the paint cures.

Fire Not Burning

A stove not burning is generally caused by either a shortage of air and/or incorrect or damp fuel. If fuel is not the problem check:

•That the air controls are opened.

•There is no blockage in the flue system.

•That the open end of the flue is above the height of any nearby obstructions.

•That there is a sufficient air supply into the room and that this supply is not being taken by an extractor fan.

Glass Blackens

Glass usually blackens when:

•The fuel is not being burned efficiently because of starvation of air.

•Bad quality or damp fuel is being used.

•Balance between primary and secondary air is incorrect.

Try to introduce more air into the stove, especially through the secondary air control on the top of the stove door as this air flows down over the glass to help burn off the creosote. For optimum efficiency always use a good quality wood.

3800PB, 3600PB specifications

The United States Stove Company has made a name for itself in the realm of home heating solutions, known particularly for its reliable wood and pellet stoves. Among its impressive lineup, the 3600PB and 3800PB models stand out for their efficiency, functionality, and innovative features.

The United States Stove 3600PB is designed for homeowners seeking an efficient heating source. This model boasts a heat output rating of up to 64,000 BTUs, which makes it capable of warming spaces up to 2,500 square feet. Its substantial hopper capacity allows for extended burn times, ensuring that users can enjoy consistent warmth without the need for frequent refueling. The 3600PB employs a direct venting system, which enhances efficiency by ensuring that outside air is used for combustion, significantly reducing indoor air pollution.

On the other hand, the 3800PB model pushes performance even further with a heat output of up to 80,000 BTUs. This makes it ideal for larger spaces or homes with open floor plans. The 3800PB also incorporates a large capacity hopper, capable of holding up to 120 pounds of pellets, allowing for longer burn times that can easily extend through the night. Both models come equipped with a digital control panel that simplifies operation and allows users to adjust heat settings and monitor pellet levels easily.

In terms of construction, both the 3600PB and 3800PB housings are built with robust materials designed to withstand the rigors of regular use. The heavy-duty steel design not only enhances durability but also improves heat retention, allowing for superior heating efficiency. These models also feature an automatic ignition system, which makes starting the stove effortless and reduces the need for manual intervention.

Safety is paramount in stove design, and both the 3600PB and 3800PB come with built-in safety features such as low-oxygen sensors and thermal overload protection. Additionally, the advanced airflow systems in these models are engineered to provide a consistent burn while minimizing emissions, aligning with modern environmental standards.

In conclusion, the United States Stove 3600PB and 3800PB are excellent choices for anyone looking to invest in reliable and efficient heating solutions. With their robust construction, advanced technology, and user-friendly features, they promise to deliver both comfort and convenience in a variety of residential settings. Whether you’re heating a compact space or a sprawling home, these models are designed to meet diverse heating needs while embracing efficiency and safety.