Service Hints, Chimney Maintenance | United States Stove 1537G

SERVICE HINTS

Do not expect a furnace to draw. It is the chimney that creates the draft. Smoke spillage into the house or excessive build-up of water or creosote in the chimney are warnings that the chimney is not functioning properly. Correct the problem before using furnace. Possible causes are:

1.The connector pipe may be pushed into the chimney too far, stopping the draft (Fig. 6)

2.Do not connect two furnaces or a stove and furnace into the same chimney flue.

3.The chimney used for a furnace must not be used to ventilate the cellar or basement. If there is a cleanout opening at the base of the chimney, it must be closed tightly.

4.If the chimney is operating too cool, water will condense in the chimney and run back into the furnace. Creosote formation will be rapid and may block the chimney. Operate the furnace at a high enough fire to keep the chimney warm, preventing this condensa- tion.

5.If the fire burns well, but sometimes smokes or burns slowly, it may be caused by the chimney top being lower than another part of the house or a nearby tree. The wind blowing over a house or a tree, falls on top of the chimney like water over a dam, beating down the smoke. The top of the chimney should be at least 3 feet above the roof and be at least 2 feet higher than any point of the roof within 10 feet (Fig. 5).

6.See page 28 for list of trouble shooting tips.

A draft reading of .05 to .06 w.c. is suggested for proper burning of this unit when using wood or bituminous coal as fuel. When using anthracite coal, this draft reading is a minimum reading.

CHIMNEY MAINTENANCE

Creosote and Soot - Formation and Need for Removal

When wood is burned slowly, it produces tar and other organic vapors, which combine with expelled moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue of a slow-burning fire. As a result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an extremely hot fire.

When coal is burned, the products of combustion combine with moisture to form a soot residue which accumulates on the flue lining. When ignited, this soot makes an extremely hot fire.

The chimney should be inspected at least twice monthly during the heating season to determine if a creosote or soot build up has occurred.

If creosote or soot has accumulated, it should be removed to reduce the risk of a chimney fire.

Chimney fires burn very hot. If the chimney

catches fire, immediately call the fire de- partment, then reduce the fire by closing the inlet air control. Pour a large quantity of coarse salt, baking soda or cool ashes on top of the fire in the firebox.

CAUTION

A chimney fire may cause ignition of wall studs or rafters which you thought were a safe distance from the chimney. If you have a chimney fire, have your chimney inspected by a qualified per- son before using again.

1537G specifications

The United States Stove 1537G is a highly regarded model within the extensive lineup of heating appliances offered by United States Stove Company, a manufacturer with a longstanding reputation for quality and innovation. This model combines efficient heating capabilities with user-friendly features and modern technologies, making it suitable for a variety of home environments.

One of the main features of the 1537G is its impressive heating output. With a robust 30,000 BTU range, this stove can effectively heat spaces of up to 2,000 square feet, making it an excellent choice for medium to large rooms. It operates on both wood and coal, providing users with the flexibility to choose their preferred fuel source based on availability and cost, thus ensuring efficient usage in different conditions.

The stove boasts a large firebox that accommodates longer pieces of wood or coal, which means less frequent refueling. This characteristic is not only convenient but also enhances the stove's overall efficiency, allowing for longer burn times and consistent heat output. The design also features a built-in ash pan that simplifies the cleaning process, promoting ease of use and maintenance.

In terms of technologies, the United States Stove 1537G is equipped with a primary air control system that allows users to regulate the airflow and, consequently, the burning rate of the fuel. This feature not only helps in achieving optimal efficiency but also contributes to a cleaner burn, reducing emissions and soot buildup. The stove's dual-door design provides easy access to the firebox for loading fuel and cleaning.

Additionally, the exterior of the 1537G is constructed from heavy-duty cast iron, which not only enhances durability but also adds a classic aesthetic appeal that complements various home decors. The heating surface is designed to radiate heat evenly throughout the room, ensuring a comfortable and warm environment.

Overall, the United States Stove 1537G is a powerful, efficient, and user-friendly heating solution. With its versatile fuel options, advanced airflow technology, and thoughtful design elements, it stands out as a top choice for homeowners seeking reliable heating solutions that combine tradition with modern functionality. Whether you're looking to save on energy costs or simply enjoy the ambiance of a wood or coal fire, the 1537G is equipped to meet those needs effectively.