United States Stove 1537G guide

RULES FOR SAFE INSTALLATION AND OPERATION

Read these rules and the instructions carefully. Failure to follow them will cause a hazard that could result in death, serious bodily injury, and/or property damage.

1.Check your local codes. The installation must comply with their rulings.

2.Do not install this furnace in a mobile home or trailer.

3.Always connect this furnace to a chimney and vent to the outside. Never vent to another room or inside a building.

4.Do not connect this furnace to an aluminum Type B gas vent. This is not safe and is prohibited by the National Fire Protection Association Code. This furnace requires a masonry or Listed Factory Built Chimney for residential type or Building Heating Appliance Chimney. Use a 6" diameter chimney or larger, that is high enough to give a good draft. (See page 7)

5.Be sure that if a masonry chimney is used, it is safely constructed and in good repair. Have the chimney inspected by the Fire Department or an inspector.

6.Inspect chimney connector and chimney before and frequently during the heating season for any deposit of creosote or soot which must be removed (See Chimney Maintenance, page 15).

7.Provide air for combustion into the room where the furnace is located. If the intake is not in the same room, air must have free access to the room.

8.CAST IRON PARTS MUST BE "SEASONED" TO AVOID CRACKING, BUILD ONLY SMALL FIRES ON FIRST USE.

9.To prevent injury, do not allow anyone to use this furnace who is unfamiliar with the correct operation of the furnace.

10.For further information on using your furnace safely, obtain a copy of the National Fire Protection Association (NFPA) publication "Chimney's, Fireplaces and Solid Fuel Burning Appliances" NFPA 211. The address of the NFPA is Batterymarch Park, Quincy, MA 02269.

11.Keep the ashpit section free of excess ashes. Do not allow ashes to stack higher than the sides of the ash pan.

12.DISPOSAL OF ASHES- Place ashes in a metal container with a tight fitting lid. Keep the closed container on a noncombustible floor or on the ground, well away from all combustible materials. Keep the ashes in the closed container until all cinders have thoroughly cooled. The ashes may be buried in the ground or picked up by a refuse collector.

13.CAUTION- The special paints used on your furnace may give off some smoke while they are curing during first few fires., Build small fires at first. The metal used in construction of the furnace and duct work has a light coating of oil. This could give off smoke and/or odor from registers when furnace is used for the first time. This should disappear after a short period of time. Once this burn-off has occurred, it should not reoccur.

14.CARING FOR PAINTED PARTS- This furnace has a painted outside jacket, which is durable, but it will not stand rough handling or abuse. When installing your furnace, use care in handling. Clean with soap and warm water when furnace in not hot. DO NOT use any acids or scouring soap, as these wear and dull the finish. DISCOLORATION WILL OCCUR IF THE FURNACE IS OVERHEATED. FOLLOW OPERATING INSTRUCTIONS CAREFULLY.

Your Furnace is designed to be installed in a parallel air flow arrangement with a gas or oil-fired forced air upflow-type central furnace, or it may be installed as a central furnace.

1537G specifications

The United States Stove 1537G is a highly regarded model within the extensive lineup of heating appliances offered by United States Stove Company, a manufacturer with a longstanding reputation for quality and innovation. This model combines efficient heating capabilities with user-friendly features and modern technologies, making it suitable for a variety of home environments.

One of the main features of the 1537G is its impressive heating output. With a robust 30,000 BTU range, this stove can effectively heat spaces of up to 2,000 square feet, making it an excellent choice for medium to large rooms. It operates on both wood and coal, providing users with the flexibility to choose their preferred fuel source based on availability and cost, thus ensuring efficient usage in different conditions.

The stove boasts a large firebox that accommodates longer pieces of wood or coal, which means less frequent refueling. This characteristic is not only convenient but also enhances the stove's overall efficiency, allowing for longer burn times and consistent heat output. The design also features a built-in ash pan that simplifies the cleaning process, promoting ease of use and maintenance.

In terms of technologies, the United States Stove 1537G is equipped with a primary air control system that allows users to regulate the airflow and, consequently, the burning rate of the fuel. This feature not only helps in achieving optimal efficiency but also contributes to a cleaner burn, reducing emissions and soot buildup. The stove's dual-door design provides easy access to the firebox for loading fuel and cleaning.

Additionally, the exterior of the 1537G is constructed from heavy-duty cast iron, which not only enhances durability but also adds a classic aesthetic appeal that complements various home decors. The heating surface is designed to radiate heat evenly throughout the room, ensuring a comfortable and warm environment.

Overall, the United States Stove 1537G is a powerful, efficient, and user-friendly heating solution. With its versatile fuel options, advanced airflow technology, and thoughtful design elements, it stands out as a top choice for homeowners seeking reliable heating solutions that combine tradition with modern functionality. Whether you're looking to save on energy costs or simply enjoy the ambiance of a wood or coal fire, the 1537G is equipped to meet those needs effectively.