Basic troubleshooting
Windows
If you are unable to print:
1.If your printer is connected directly to your computer with a USB cable, make sure the cable connections are secure.
2.Make sure the printer is powered on. The On button will be lit green.
Make sure that the printer is set as your default printing device:
1.Windows 7®: From the Windows Start menu, click Devices and Printers.
2.Windows Vista®: On the Windows taskbar, click Start, click Control Panel, and then click Printer.
3.Windows XP®: On the Windows taskbar, click Start, click Control Panel, and then click Printers and Faxes.
Make sure that your printer has a check mark in the circle next to it. If your printer is not selected as the default printer,
If your printer is connected directly to your computer with a USB cable and the software installation fails:
1.Remove the CD from the computer’s CD/DVD drive, and then disconnect the USB cable from the computer.
2.Restart the computer.
3.Insert the printer software CD in the computer’s CD/DVD drive, then follow the onscreen instructions to install the printer software. Do not connect the USB cable until you are told to do so.
4.After the installation finishes, restart the computer.
Windows XP and Windows Vista are U.S. registered trademarks of Microsoft Corporation. Windows 7 is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Mac
If you are unable to print:
1.If your printer is connected to your computer with a USB cable, make sure the cable connections are secure.
2.Make sure the printer is powered on. The On button will be lit green.
Check your print queue:
1.In System Preferences, click
2.Click the Open Print Queue button.
3.Click a print job to select it.
4.Use the following buttons to manage the print job:
5.If you made any changes, try to print again. Restart and reset:
1.Restart the computer.
2.Reset the printer.
a.Turn off the printer and unplug the power cord.
b.Wait a minute, then plug the power cord back in and turn on the printer.
If you are still unable to uninstall and reinstall the software:
Note: The uninstaller removes all of the HP software components that are specific to the device. It does not remove components that are shared by other products or programs.
To uninstall the software:
1.Disconnect the HP product from your computer.
2.Open the Applications:
3.
To install the software:
1.Connect the USB cable.
2.Insert the HP software CD into your computer’s CD/DVD drive.
3.On the desktop, open the CD and then
4.Follow the onscreen and the printed setup instructions that came with the HP product.
English
3