HP ZR2740w 27-inch IPS manual Using the On-Screen Display Menu Select Models

Page 33

Using the On-Screen Display Menu (Select Models)

Pressing the Power button, , puts the monitor in low power mode. (To turn power off completely,

use the switch on the rear of the panel.) The monitor also enters low-power mode when there is no video signal input.

When the monitor is first powered on, the LED turns blue and remains blue for about half a minute. It then turns off. If the monitor receives a signal outside its range (e.g., too high a frequency), the LED flashes blue continuously.

This model does not use an OSD or on-screen messages.

Using the On-Screen Display Menu (Select Models)

The On-Screen Display (OSD) menu gives you choices for operating your monitor. Not all menu options below are available on all models. For example, monitors with no analog input do not show menus specific to analog images. The ZR2740w does not use an OSD. Models that use an OSD have a menu () button on the front.

NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults by opening the OSD and selecting Factory Reset from the OSD menu.

NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml.

Overview of Operation 27

Image 33

Contents User Guide HP ZR2040w, ZR2240w, ZR2440w and ZR2740w LCD Monitors2011, 2012 Hewlett-Packard Development Company, L.P About This Guide iv About This Guide 1 Product Features Table of contents2 Setting Up the Monitor Appendix A Technical SpecificationsZR2240w Model Preset Modes ZR2040w Model Preset ModesZR2440w Model Preset Modes ZR2740w Model Preset ModesZR2040w Model 1 Product FeaturesZR2440w Model ZR2240w ModelZR2440w Model ZR2740w Model Installing the Pedestal 2 Setting Up the MonitorZR2040w Model Rear ComponentsZR2240w Model Figure 2-4 ZR2240w Rear ComponentsRear Components ZR2440w Model 8 Chapter 2 Setting Up the MonitorFigure 2-5 ZR2440w Rear Components Rear Components ZR2740w Model 10 Chapter 2 Setting Up the MonitorFigure 2-6 ZR2740w Rear Components Routing and Connecting the Cables 12 Chapter 2 Setting Up the Monitor 4. Connect the AC power cord and plug it into the wall outletFigure 2-10 Cable Routing ZR2240w, ZR2440w, and ZR2740w ModelsMounting the Monitor to User-Supplied Support Hardware Mounting the ZR2040w Panel Mounting a Quick-Release Panel 3. Slide the pedestal out of the recess Locating the Information Card Select Models Turning on the Monitor Installing a Cable LockAdjusting the Monitor Adjusting the Monitor Figure 2-22 Adjusting the Height Select Modelsb. Gently push down on the display head d. Guide the display head up to the desired heightPortrait Orientation 3 Operating the Monitor Overview of OperationZR2040w and ZR2240w Model 24 Chapter 3 Operating the Monitor Figure 3-1 ZR2040w and ZR2240w Front Panel ControlsControl Figure 3-3 ZR2740w Front Panel Controls Using the On-Screen Display Menu Select Models 4 Locating Additional Information A Technical Specifications Table A-1 ZR2240w Specifications 30 Appendix A Technical SpecificationsTable A-1 ZR2240w Specifications continued 32 Appendix A Technical Specifications ZR2040w Model Preset Modes Preset Display ResolutionsZR2240w Model Preset Modes Table A-2 ZR2040w High Definition Video FormatsZR2440w Model Preset Modes 34 Appendix A Technical SpecificationsTable A-3 ZR2240w High Definition Video Formats Table A-4 ZR2440w High Definition Video Formats ZR2740w Model Preset Modes Energy Saver Feature

Related manuals

Manual 1 pages 20.53 Kb