HP ZR2740w 27-inch IPS manual ZR2440w Model, Control

Page 31

Control

ZR2440w Model

The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort, DVI-D, HDMI. You can change the current input, the default and the scan order through the OSD. Pressing the + button on the front of the monitor will take you directly to the OSD source-control submenu.

Figure 3-2ZR2440w Front Panel Controls

Control			Function

1		Menu	Opens, selects or exits the OSD menu.

2		Minus	If the OSD menu is on, press to navigate backward through
			the OSD menu and decrease adjustment levels.

3		Plus/source	If the OSD menu is on, press to navigate forward through
			the OSD menu and increase adjustment levels.
			If the OSD menu is inactive, press to activate the source
			button that chooses the video signal input (VGA, DVI, or
			DisplayPort).

4	OK	OK	If the OSD menu is on, press to select the highlighted
			menu item.

5		Power	Turns the monitor on or off as long as the master power
			switch on the rear panel is on.

6		Power LED	Blue = Fully powered.
			Amber = Sleep mode.
			Flashing Amber = Sleep Timer mode.

No light indicates power off, or normal operation if the LED is suppressed.

Overview of Operation 25

Image 31

Contents User Guide HP ZR2040w, ZR2240w, ZR2440w and ZR2740w LCD Monitors2011, 2012 Hewlett-Packard Development Company, L.P About This Guide iv About This Guide Appendix A Technical Specifications Table of contents1 Product Features 2 Setting Up the MonitorZR2740w Model Preset Modes ZR2040w Model Preset ModesZR2240w Model Preset Modes ZR2440w Model Preset ModesZR2040w Model 1 Product FeaturesZR2440w Model ZR2240w ModelZR2440w Model ZR2740w Model Installing the Pedestal 2 Setting Up the MonitorZR2040w Model Rear ComponentsFigure 2-4 ZR2240w Rear Components ZR2240w ModelRear Components 8 Chapter 2 Setting Up the Monitor ZR2440w ModelFigure 2-5 ZR2440w Rear Components Component 10 Chapter 2 Setting Up the Monitor ZR2740w ModelFigure 2-6 ZR2740w Rear Components Routing and Connecting the Cables 12 Chapter 2 Setting Up the Monitor 4. Connect the AC power cord and plug it into the wall outletFigure 2-10 Cable Routing ZR2240w, ZR2440w, and ZR2740w ModelsMounting the Monitor to User-Supplied Support Hardware Mounting the ZR2040w Panel Mounting a Quick-Release Panel 3. Slide the pedestal out of the recess Locating the Information Card Select Models Turning on the Monitor Installing a Cable LockAdjusting the Monitor d. Guide the display head up to the desired height Figure 2-22 Adjusting the Height Select ModelsAdjusting the Monitor b. Gently push down on the display headPortrait Orientation Overview of Operation 3 Operating the MonitorZR2040w and ZR2240w Model 24 Chapter 3 Operating the Monitor Figure 3-1 ZR2040w and ZR2240w Front Panel ControlsControl Figure 3-3 ZR2740w Front Panel Controls Using the On-Screen Display Menu Select Models 4 Locating Additional Information A Technical Specifications Table A-1 ZR2240w Specifications 30 Appendix A Technical SpecificationsTable A-1 ZR2240w Specifications continued 32 Appendix A Technical Specifications Table A-2 ZR2040w High Definition Video Formats Preset Display ResolutionsZR2040w Model Preset Modes ZR2240w Model Preset Modes34 Appendix A Technical Specifications ZR2440w Model Preset ModesTable A-3 ZR2240w High Definition Video Formats Table A-4 ZR2440w High Definition Video Formats ZR2740w Model Preset Modes Energy Saver Feature

Related manuals

Manual 1 pages 20.53 Kb