HP Z27i 27-inch manual Installing a Cable Lock, Power Saving Features, Power-Saver Mode

Page 28

Installing a Cable Lock

You can secure the monitor to a fixed object with an optional cable lock available from HP.

Power Saving Features

The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize .5 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).

NOTE: The above power saver feature only works when connected to computers that have energy saver features.

By selecting the settings in the monitor's energy saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's energy saver utility causes the monitor to enter the reduced power state, the power light blinks amber.

Power-Saver Mode

The monitor includes a Power-Saver Mode that can be quickly adjusted in the OSD while the monitor is still in use. The Power Saver function serves primarily to reduce LED backlight current (display brightness) in stages to enable power savings of the monitor. The savings levels are NOT calibrated but are approximate savings based on power measurements conducted during product qualification.

To adjust the power savings, press the Menu button on the front of the monitor to open the OSD and select Management > Power-Saver Mode. Set the power savings to one of the following:

Off

10% Savings

20% Savings

22 Chapter 2 Setting Up and Using the Monitor

Image 28
Contents HP Z24i, Z27i, and Z30i IPS Displays First Edition August Document Part Number About This Guide Iv About This Guide Table of contents Z27i Model Z30i Model Product Features HP IPS MonitorsPage Setting Up and Using the Monitor Installing the StandRear Components Z24i ModelZ27i and Z30i Models HdmiConnecting the Cables Page Page Page Front Panel Controls Control FunctionAdjusting the Monitor Page Adjusting the Monitor Turning on the Monitor HP Watermark and Image Retention PolicyConnecting USB Devices Removing the Monitor StandMounting the Monitor Page Page Page Page Locating the Serial Number and Product Number Locating the Information CardPower Saving Features Installing a Cable LockPower-Saver Mode Auto-Sleep Mode Sleep TimerPage Reference Guides Product SupportZ24i Model Z27i ModelZ27i Model Z30i Model Recognizing Preset Display Resolutions Preset Pixel Format Horz Freq kHz Vert Freq HzZ27i Model Z30i Model Entering User Modes