TriStar SP3010X15AZ, SP3207X10, SP3207EE TriStar Pump Series Low Flow Generally, Check For cont’d

Page 14

TriStarPump Series ___________________

____________________________ Page 14 of 15

Low Flow – Generally, Check For: (cont’d.)

2.Undersized pool piping. Solution: Correct piping size.

3.Plugged or restricted discharge line of filter, valve partially closed (high gauge reading).

Solution: Sand filters – backwash as per manufacturer’s instructions; D.E. filters – backwash as per manufacturer’s instructions; Cartridge filters – clean or replace cartridge.

4.Air leak in suction (bubbles issuing from return fittings).

Solution: Re-tighten suction and discharge connections using Teflon tape. Inspect other plumbing connections and tighten as required.

5.Plugged, restricted, or damaged impeller. Solution: Replace including new seal assembly.

Noisy Pump – Check For:

1.Air leak in suction piping, cavitations caused by restricted or undersized suction line or leak at any joint, low water level in pool, and unrestricted discharge return lines.

Solution: Correct suction condition or throttle return lines, if practical. Holding hand over return fitting will sometimes prove this point or putting in a smaller eyeball fitting.

2.Vibration due to improper mounting, etc.

Solution: Mount the pump on a level surface and secure the pump to the equipment pad.

3.Foreign matter in pump housing. Loose stones/debris hitting impeller could be cause. Solution: Clean the pump housing.

4.Motor bearings noisy from normal wear, rust, overheating, or concentration of chemicals causing seal damage which will allow chlorinated water to seep into bearings wiping out the grease causing bearing to whine.

Solution: All seal leaks should be replaced at once.

© Hayward Pool Products, Inc. 2005 All rights reserved.

PRODUCT REGISTRATION

(Retain For Your Records)

DATE OF INSTALLATION ____________________

 

INITIAL PRESSURE GAUGE READING (CLEAN FILTER)

_______________________

PUMP MODEL ________________

HORSEPOWER

_______________________

FILTER MODEL ________________

SERIAL NUMBER

_______________________

 

 

 

WWW.HAYWARDPOOL.COM

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Image 14
Contents Division Street ELIZABETH, NJ 07207 908 USE only Hayward Genuine Replacement PartsTriStar Pump Replacement Guide Full RatedUse of non-Hayward replacement parts voids warranty TriStar Pump SeriesUSE only Hayward Genuine Replacement Parts Introduction WarrantyGeneral Information Product BenefitsInstallation Instructions Maximum Recommended System Flow Rate by Pipe SizeTriStar Pump Series Pump Mounting cont’d Plumbing ElectricalPrior to Start-Up Start-Up & OperationTriStar Pump Series Electrical cont’d Maintenance TriStar Pump Series Starting/Priming the PumpStoring Pump For Winterization Storage/WinterizationShaft Seal Change Instructions USE only Hayward Genuine Replacement Parts Parts Listing Replacement PartsParts Diagram TriStar Pump Series Parts Listing cont’d Pump SKU DetailTroubleshooting Product Registration TriStar Pump Series Low Flow Generally, Check For cont’dNoisy Pump Check For Products from Hayward Hayward Limited WarrantyPlease send me more information on these other

SP3010EEAZ, SP3210EE, SP3215X20, SP3015EEAZ, SP3210X15 specifications

The TriStar range of pressure and temperature transmitters, specifically the models SP3010EEAZ, SP3010X15AZ, SP3215X20, SP3207X10, and SP3210X15, showcases advanced technologies tailored for precision in industrial applications. These transmitters are engineered to provide accurate readings under a variety of conditions, enhancing the efficiency and reliability of processes.

The SP3010EEAZ is designed for temperature measurement, utilizing a highly sensitive sensor that offers a wide temperature range. Its robust construction makes it ideal for harsh environments, ensuring durability and longevity. This model features advanced signal processing algorithms that minimize noise and improve measurement accuracy. Additionally, it supports multiple output options, allowing for versatile integration into existing systems.

Similarly, the SP3010X15AZ is a versatile pressure transmitter known for its compact design and high-performance characteristics. It employs piezoresistive sensing technology, which ensures quick response times and exceptional stability over time. The SP3010X15AZ is capable of measuring both gauge and absolute pressures, making it suitable for various applications across different industries. Its digital display provides real-time readings, enhancing operational oversight.

The SP3215X20 extends the range of capabilities with its dual functionality, measuring both pressure and temperature. Featuring an intuitive user interface, it allows for straightforward calibration and adjustment. This model incorporates advanced diagnostics, which can alert users to potential issues, ensuring that system integrity is maintained.

On the other hand, the SP3207X10 is a specialized transmitter with a focus on high-pressure applications. Equipped with reinforced housing and advanced sealing technologies, it offers unparalleled resistance to extreme conditions. Its design prioritizes safety, making it a reliable choice for critical processes.

Lastly, the SP3210X15 combines cutting-edge technology with user-friendly features. Its modular design allows for easy maintenance and upgrades, making it adaptable for evolving industrial needs. With high accuracy and a broad operational range, this model is perfect for applications requiring precise pressure and temperature monitoring.

In summary, the TriStar SP series transmitters exemplify innovation in pressure and temperature measurement. Their combination of advanced sensor technologies, user-centric designs, and robust construction positions them as ideal solutions for industrial applications, ensuring enhanced performance and reliability across various operational settings.