HP x22 21.5 inch, x20 20-inch manual Power Cord Set Requirements, Japanese Power Cord Requirements

Page 32

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100120V~ or 200240V.

The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment.

If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.

The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm2 or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).

If you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.

Japanese Power Cord Requirements

For use in Japan, use only the power cord received with this product.

CAUTION: Do not use the power cord received with this product on any other products.

Product Environmental Notices

Materials Disposal

This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life.

Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA)

http://www.eiae.org .

26 Appendix C. Agency Regulatory Notices

ENWW

Image 32
Contents HP x20LED, x22LED, x22LEDc and x23LED Monitors User Guide Page Document Part Number 603461-002 Second Edition, June About This Guide Table of Contents Troubleshooting Technical Specifications Product Features HP LCD MonitorsSafety Precautions Safety and Maintenance GuidelinesImportant Safety Information Maintenance Guidelines Cleaning the MonitorUnpacking the Monitor Setting Up the MonitorInstalling the Monitor Connecting Monitor Cables High-Bandwidth Digital Content Protection HdcpConnecting the Power Cable Connecting the VGA Analog Cable or DVI-D Digital CableEnww Installing Drivers Installing the monitor driver software from the CDDownloading updated drivers from the Internet Operating the MonitorFront-Panel Controls Hot Key definitionUsing the On-Screen Display OSD Image Color Temp OSD Setup SUB Selecting Video Input Connectors Adjusting Screen QualityIdentifying Monitor Conditions Optimizing Analog VideoPower-Saver Feature Problem Possible Solutions TroubleshootingSolving Common Problems Have the following information available when you call Getting Support from hp.comPreparing to Call Technical Support Locating the Rating LabelTechnical Specifications HP LCD MonitorsTable B-2 Model x22LED/ x22LEDc Table B-3 Model x23LED Preset Video Modes LCD Monitor Quality and Pixel Policy Agency Regulatory Notices Federal Communications Commission NoticeModifications CablesEuropean Union Regulatory Notice Canadian NoticeAvis Canadien German Ergonomics Notice Japanese Notice Korean NoticeProduct Environmental Notices Materials Disposal Power Cord Set RequirementsJapanese Power Cord Requirements Enww Turkey EEE Regulation
Related manuals
Manual 2 pages 35.57 Kb