HP w1707 17-inch, w2207h 22 inch, w1907 19 inch, w2408h manual Unfolding the double-hinged monitor

Page 12

Setting Up the Monitor

Unfolding the double-hinged monitor

ÅWARNING: Do not place the double-hinged monitor face down for folding. The base hinge can spring up and cause serious injury or damage.

1.With the monitor still in its flat, folded state, set it screen-side up on a flat surface.

2.Rotate the screen to the horizontal position (in the figure, the straight arrow is your position in front of the monitor).

3.Holding the base of the monitor, lift up the panel at its top without touching or putting pressure on the screen (3).

4.Remove the shipping strap (do not cut it) (4).

5.Put the shipping strap in a safe place, in case you need it to ship the monitor.

6.Lift and lower the base hinge for proper viewing.

3–2	User’s Guide

Image 12

Contents User’s Guide USA Notational Conventions User’s Guide Contents Troubleshooting Technical Specifications Operating the MonitorPreparing the Monitor for Shipping Agency Regulatory NoticesProduct Features FeaturesHP LCD Monitors Base Designs Safety and Maintenance Guidelines Important Safety InformationSafety Precautions Maintenance Guidelines Cleaning the MonitorSetting Up the Monitor Installing the MonitorInstalling on a Desktop Unpacking the MonitorUnfolding the double-hinged monitor Assembling the cantilever base Assembling the column baseWall-Mounting the Monitor Mounting Fixture not Supplied Preparing the double-hinged monitor for wall-mountingPreparing the cantilever-base monitor for wall-mounting Reinstalling the desktop pedestal and base for the monitor Preparing the column-base monitor for wall-mountingConnecting the VGA Analog or DVI-D Digital Cable Connecting the Hdmi CableTo connect the VGA cable To connect the DVI-D cableAudio and Video Cables and Adapters Cable/Adapter Name DescriptionConnecting the Audio Cable Connecting the USB Hub CableConnecting USB Devices to the Monitor Connecting the Power Cable Connecting the power cableCable Management Adjusting the Tilt Adjusting the Swivel Select Models Only Adjusting the Height Select Models OnlyPivoting the Monitor Select Models Only Ambient Light Sensor Select Models Only Keyboard ParkingSetting Up the Monitor Installing Drivers Using the Auto-Adjustment FunctionDownloading Updated Drivers from the Internet Operating the MonitorSelect Open Auto-Adjustment Software My Display SoftwareUsing the Onscreen Display OSD Front-Panel ControlsOSD Menu Selections Main Menu Icon Options Submenu Options DescriptionIcon Main Menu Submenu Options Description Sets your own blue color levelsTop Selecting Video Input Connectors Adjusting Screen QualityIdentifying Monitor Conditions Power-Saver Feature High-Bandwidth Digital Content Protection HdcpOptimizing Analog Video Preparing the Monitor for Shipping Removing the Monitor BaseRemoving the cantilever base Removing the column base Removing the column baseFolding the Double-Hinged Monitor Preparing the Monitor for Shipping Troubleshooting Solving Common ProblemsProblem Solution Locating the Rating Label No Plug and PlayTechnical Specifications Specifications Model vp15Specifications Model vp17 Model vp19Specifications Model FP1707 Model WF1907Specifications Model w1707 Model w1907Specifications Model w2007 Model w2207Specifications Model w2216 Model w2408Preset Video Modes W1707 supports preset modes 1 throughWF1907 and w1907 support preset modes 1 through W2007 supports preset modes 1 through W2216 supports preset modes 1 through W2408 supports preset modes 1 through Power Cord Set Requirements LCD Monitor Quality and Pixel PolicyAgency Regulatory Notices Federal Communications Commission NoticeModifications CablesMaterials Disposal Canadian NoticeAvis Canadien European Union Regulatory NoticeKorean Notice EPA Energy Star Compliance HP Recycling Program#$%&*+

Related manuals

Manual 1 pages 51.46 Kb

Manual 1 pages 27.92 Kb

Manual 1 pages 107 b