HP w19 19 inch manual Technical Support FAQ HP w19 LCD Monitor

Page 15

Back to Contents Page

Technical Support FAQ: HP w19 LCD Monitor

Technical Support FAQ (Frequently Asked Questions)

Problem & Question

Power LED is not on

No Plug & Play

Picture is fuzzy and has ghosting shadowing problem

Picture bounces, flickers or wave pattern is present in the picture

Monitor is stuck in "Active Off-Mode"

Missing one of the primary colors (red, green, or blue)

Screen image is not centered or sized properly

Picture has color defects (white does not look white)

Possible Solutions

•Make sure the power button is on and the power cord is properly connected to a grounded power outlet and to the monitor.

•In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer and video card. Check with your computer manufacturer. Also check the monitor's video cable and make sure none of the pins are bent.

•Make sure the HP monitor drivers are installed (HP monitor drivers are available at: http://www.hp.com/support).

•Adjust the contrast and brightness controls.

•Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back of your computer.

•Move electrical devices that may cause electrical interference as far away from the monitor as possible.

•Use the maximum refresh rate your monitor is capable of at the resolution your are using.

•The computer power switch should be in the on position.

•The computer video card should be snugly seated in its slot.

•Make sure the monitor’s video cable is properly connected to the computer.

•Inspect the monitor’s video cable and make sure none of the pins are bent.

•Make sure your computer is operational by hitting the Caps Lock key on the keyboard while observing the Caps Lock LED. The LED should either turn on or off after hitting the Caps Lock key.

•Inspect the monitor’s video cable and make sure that none of the pins are bent.

•Make sure the monitor's video cable is properly connected to the computer.

•Adjust H-Position and V-Position or press hot-key (Auto)

•Adjust RGB color or select color temperature

Page 14 Page 16
Image 15
Page 14 Page 16
Contents USA HP w19 LCD Monitor Users GuidePreface HP w19 LCD Monitor About This GuideNotational Conventions Safety and Maintenance Guidelines HP w19 LCD Monitor Important Safety InformationSafety Precautions Cleaning the Monitor Maintenance GuidelinesSetup HP w19 LCD Monitor Base HP w19 LCD MonitorBase Attaching the Base Removing the Base Cable Connections On Back of Monitor and Computer Attaching the Cables HP w19 LCD MonitorAttaching Wall Mounting Arm HP w19 LCD Monitor Installing an Optional Wall Mounting Arm Not supplied Setting the Optimal Resolution HP w19 LCD Monitor Using the Monitor HP w19 LCD MonitorExternal Controls How to Adjust a SettingControls HP w19 LCD Monitor Operating InstructionsMain Menu Item Sub Menu Item Description Icon Adjusting the PictureStatus LED IndicatorsUsing the Auto-Adjustment Function Downloading from the World Wide WebTechnical Support FAQ Frequently Asked Questions Technical Support FAQ HP w19 LCD MonitorLCD Panel Specifications HP w19 LCD MonitorResolution GeneralPreset Display Modes Physical CharacteristicsEnvironmental Power Cord Set Requirements Pin Number Pin Side of the Signal CablePin Assignments Plug and Play DDC2B Feature Pin No Signal NameLCD Monitor Quality and Pixel Policy HP w19 LCD Monitor Cables Agency Regulatory Notices HP w19 LCD MonitorFederal Communications Commission Notice ModificationsJapanese Notice Canadian NoticeAvis Canadien European Union Regulatory NoticeJapanese Power Cord Notice Korean Notice Materials Disposal HP Recycling ProgramEPA Energy Star Compliance
Top Page Image Contents