hp pavilion f50/f70 LCD Monitor Setting Up the Monitor
Setting Up the Monitor
Place the monitor on a flat, sturdy surface. Ensure that the operating site is free from excessive heat and moisture. For best performance, make sure nothing is resting on the monitor.
WARNING: Before you connect any cables or install the HP
!monitor, refer to the safety instructions at the beginning of this manual. Refer also to the documentation that came with the computer to ensure this equipment is correctly installed.
Connecting two computers to the monitor
The LCD monitor has two video signal connectors on the rear panel: one analog (VGA) and one digital
Video
connectors
DVI VGA
When two computers are connected, you need to use the Input Priority setting on the onscreen display (OSD) to switch from one video signal to the other. See “Input Priority” on page 33. The LCD must be set to one signal or the other to operate properly.
X11