Operating the Monitor
✎Some DVD wide screen modes may provide formats other than 16:9. When this occurs, black video borders may remain visible above and below the displayed image when Zoom On 2 is active.
5.When the desired zoom setting is highlighted, press the Menu button to confirm the selection. The OSD returns to the Image Control menu. Select the option to Cancel or Save the new zoom setting.
6.Press the Menu button and select Exit to close the Main Menu.
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the OSD can be adjusted to improve image performance: Clock and Clock Phase. Use these controls only when the auto adjust function does not provide a satisfactory image.
✎The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting.
■Clock — Increase/decrease the value to minimize any vertical bars or stripes visible on the screen background.
■Clock Phase — Increase/decrease the value to minimize video distortion or video jitter.
✎When using the controls, you will obtain the best results by using the adjustment pattern provided on the
User’s Guide |