HP f2304 High Def manual Setting Up the Monitor

Setting Up the Monitor

ÄCAUTION: Ensure that the front bezel of the monitor is positioned over a flat table or desktop to prevent it from getting scratched, defaced, or broken when removing the base from the monitor.

To remove the monitor base:

1.Disconnect and remove the signal and power cables from the back of the monitor.

2.Lay the monitor face down on a flat area.

3.Remove the back panel by gently pulling on the handle and then slowly easing the tabs around the panel out of the tab slots.

4.Remove the four screws from the monitor base as shown in the following illustration.

5.Remove the monitor base from the monitor.

3–6 User’s Guide