Omega Vehicle Security 850i Silent Arming and Disarming, Glass Breakage & 2-ZONE Impact Sensor

Page 19

Feature #5

Automatic Rearming

 

(Factory Default Setting Off)

This feature prevents your system from being disarmed accidentally, config- uring the system to automatically rearm itself 90 seconds after it has been Disarmed by the transmitter. The operation of the Automatic Rearming feature is explained in more detail on pages 12-13.

Programming Automatic Rearming:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released five times. The system’s response will be five siren chirps, and the Status Light flashing five times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to turn on the Automatic Rearming feature (the siren will chirp once) or the "Disarm/Unlock" button to turn the Automatic Rearming feature off (the siren will chirp twice).

Feature #6

Auxiliary Output #2 Also Disarms System

 

(Factory Default Setting On)

This feature configures the Auxiliary Output #2 to automatically Disarm the system at the same when it is used.

Programming Auxiliary Channel #2 Disarms System:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released six times. The system’s response will be six siren chirps, and the Status Light flashing six times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to have the system Disarm when Auxiliary Output #2 is used (the siren will chirp once) or the "Disarm/Unlock" button to have Auxiliary Output #2 not Disarm the system when it is used (the siren will chirp twice).

Feature #7

Parking Light Illumination Upon Disarm

 

(Factory Default Setting On)

This feature configures the system to illuminate the vehicle’s parking and interior lights for 30 seconds when it is Disarmed. Otherwise, if this feature is turned off, the parking lights will illuminate only 5 seconds upon Disarming.

Programming Parking Light Illumination Upon Disarm:

Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released seven times. The system’s response will be seven siren chirps, and the Status Light flashing seven times, pausing, then repeating. Within 10 seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to have the parking lights turn on for 30 seconds when the system is Disarmed (the siren will chirp once) or the "Disarm/Unlock" button to have the parking lights on for 5 seconds when the system is Disarmed (the siren will chirp twice).

SILENT ARMING AND DISARMING

The transmitter or Echo transceiver can also silently Arm or Disarm the system. Pressing the “ II” button twice simply reverses, or “toggles” the Armed or Disarmed status that the system is in at the time.

To Silently Arm or Disarm the System:

Press & Release the “Auxiliary #2 Output” Button ( II ) Twice

Silent Arming and Silent Disarming are both operated by double-pressing the same transmitter button.

Press

 

THE SIREN

THE PARKING LIGHTS

2 X

Press

WILL NOT

WILL FLASH TWICE IF

CHIRP

ARMING, ONCE IF

 

2 X

 

DISARMING

 

 

 

THE DOORS WILL LOCK IF

 

 

 

ARMING, UNLOCK IF DISARMING

GLASS BREAKAGE & 2-ZONE IMPACT SENSOR

Sensors: The Crime Guard 850i4e security system is equipped with a Glass Breakage and Dual-Zone Infrasonic Impact Sensor to increase the effectiveness of the system. The impact sensor is just one in a comprehensive line of available sensors. Other available options are: piezo shock sensors, and microwave/radar sensors which can detect objects in motion both inside and outside the vehicle.

•The Crime Guard 850i 4e control module features dual auxiliary sensor ports, which easily allows the addition of a further optional sensor.

•If desired, the sensor zone only can be bypassed when the system is armed with the transmitter or Echo transceiver, but leaving the other protection zones in place. This feature is convenient when environmental factors, such as hail or thunder storms, may lead to the system being activated erroneously.

Prewarning Detection Circuit: When the sensor’s prewarn zone is violated the security system will respond by chirping the siren three times and relocking all of the doors.* If the prewarn circuit is triggered five times while the system is armed, the circuit will automatically shutdown until the security system is disarmed and armed again.

•Prewarning operates from the Infrasonic Impact Sensor only; the Glass Breakage fully activates the system.

*An optional doorlock interface must be installed

Page 32

Page 17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 850i4e Inside Front Cover Inside Back Cover PRINTER’S Note Table of Contents #31 Turbo Timer Second Arming DelayIgnition-Activated Vehicle Recovery Door-Activated Vehicle RecoveryAbout Your NEW Crime Guard System Features Programming ChecklistOther Omega Echo Notes Press and release Press and releasePress and release the P button Press and release the .. buttonButton Programming the Echo Transceiver FunctionsPress and release Button After 5 seconds the Echo chirps twice release the P buttonUpon Arming the System will Using Your Crime Guard SystemProgramming Transmitters Or Echo Transceivers There are three methods of Arming the security systemUpon Arming with the Echo Transceiver, it will Feature #30Feature #31 Turbo Timer Last Door Arming by Exiting the CARFeature #29 Tach Wire or Tachless Starter Operation Feature #28Feature #27 Gasoline Or Diesel Engine Feature #26 Total Closure Lock OutputSystem Armed & Activated Feature #25 Double Unlock Pulse Feature #24Door Lock/Unlock Pulse DurationDisarming the System Feature #23 Or 2 Button Arming / Disarming Feature #22 Soft or Loud Horn Confirmation ChirpsAutomatic Rearming Feature #19 Steady/Flashing Lights During Remote StartFeature #20 Feature #21 Steady Siren or Pulsed Horn OutputDisarming by Emergency Override Feature #17 Chirp ConfirmationFeature #18 Remote Start Run Time 10 Or 20 Minutes To Disarm the System without using a TransmitterTo Activate Enhanced Remote Panic Enhanced Remote PanicAuxiliary Outputs Feature #11 Open Door Bypass Of Ignition LockingFeature #12 Doors Lock With Last Door Arming Feature #13 Doors Lock With Automatic RearmTo Activate Auxiliary Output #3 To Activate Auxiliary Output #2Glass Breakage & 2-ZONE Impact Sensor Silent Arming and DisarmingRemote Engine Starting Remote Sensor BypassTo Activate Remote Starting Feature #1 SecureCodeFactory Default Setting 1 Press How to custom program a new SecureCodeTo Access and Change further Features To Change a FeatureTo Exit Programing Mode To Access a Feature To Enter Programing ModeLevel #2 Vehicle Recovery activated by an open door Vehicle RecoveryAlarm Valet Mode Alarm Valet & Starting Valet ModesTo Enter both Modes Full Valet Mode Status Indicator LightTo enter Alarm Valet Mode To Enter Starting Valet Mode

850i specifications

The Omega Vehicle Security 850i is a cutting-edge vehicle security system designed to provide robust protection against theft and unauthorized access. Known for its blend of innovative technologies and user-friendly features, the 850i stands out in the crowded market of automotive security solutions.

One of the primary features of the Omega 850i is its two-way remote communication system. This technology allows vehicle owners to receive real-time alerts about their vehicle's status. The remote offers a range of up to one mile, enabling users to lock, unlock, and control their vehicle from a distance. Additionally, the system includes a built-in panic button, which can be activated in emergencies to alert those nearby and deter potential threats.

The 850i is equipped with advanced technologies such as a shock sensor, which detects any impact or tampering. This feature is crucial for ensuring that even minor disturbances are addressed promptly, providing peace of mind to vehicle owners. Furthermore, the system includes a hood and door sensor, which monitors unauthorized entry attempts, further enhancing its protective capabilities.

Another notable characteristic of the Omega 850i is its programmable settings. Users can customize various functions, such as the sensitivity level of the shock sensor and the duration of the siren, allowing for a tailored security experience that meets individual preferences. The system is also capable of integrating with other security devices, creating a comprehensive security ecosystem for the vehicle.

The 850i also incorporates a dedicated lifetime warranty, signaling the brand's commitment to quality and customer satisfaction. This assurance is crucial for vehicle owners looking to invest in a long-term security solution. Additionally, the installation process is straightforward, and many users appreciate the option of professional installation to ensure the system functions optimally.

Overall, the Omega Vehicle Security 850i is an excellent choice for anyone seeking a reliable and feature-rich vehicle security system. With its two-way communication, advanced sensors, and customizable features, it offers exceptional protection that adapts to the evolving landscape of vehicle theft and safety demands. Whether for personal vehicles, commercial fleets, or premium automobiles, the 850i consistently delivers confidence and security to drivers everywhere.
Top Page Image Contents