Omega Vehicle Security 850i Using Your Crime Guard System, Upon Arming the System will

Page 8

USING YOUR CRIME GUARD SYSTEM

Arming the Crime Guard system turns on the antitheft protection, disables the vehicle’s starter and locks the doors (provided an interface is installed). Once the system is Armed, any intrusion attempt will Activate it, sounding the siren and flashing the lights to attract attention. Disarming the system turns off the protection, allowing normal use of the vehicle.

There are three methods of Arming the security system:

1- The first method is to use the transmitter or transceiver, by pressing and releasing its “Arm/Lock” button. The system must not be in Alarm Valet Mode (page 23-24), and the vehicle’s ignition switch must be off. Every press of the “Arm/Lock” button arms the system, even if it is already armed.

2- The second method is to press and release the transmitter or transceiver’s “ II” button twice within 5 seconds. This is “Silent Arming”.

3- The third method is Last Door Arming, which configures the system to automatically arm every time you exit the vehicle. This method of arming is programmable, and may be used or not used as desired.

REMOTE ARMING BY TRANSMITTER OR TRANSCEIVER

To Arm the System:

Press & Release the “Arm/Lock” Button ( U) on Either

THE SIREN CHIRPS TWICE

TO CONFIRM ARMING

THE PARKING LIGHTS

FLASH TWICE

TO CONFIRM

ARMING

THE DOORS WILL LOCK*

Upon Arming the System will:

• The siren will chirp twice (or four times if a zone is bypassed) unless the silent arming procedure is followed.

• The parking lights will flash twice (or four times if a zone is bypassed).

• The doors will lock*.

* An optional doorlock interface must be installed

program the feature, follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and released thirty one times. The system’s response will be thirty one siren chirps, and the Status Light flashing thirty one times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s "Arm/Lock" button to turn on the Turbo Timer feature (the siren will chirp once) or the "Disarm/Unlock" button to turn it off (the siren will chirp twice).

PROGRAMMING TRANSMITTERS

OR ECHO TRANSCEIVERS

Your Crime Guard 850i4e system is capable of being operated by as many as four controllers; these can be any combination of standard Crime Guard transmitters or Omega Echo transceivers. Regardless of which, the transmitter or transceiver must be encoded, or programmed, to the system in order to operate it (excepting the originals, which were programmed at the factory). This programming procedure is identical for a transmitter or Echo transceiver. To program additional or replacement transmitters or transceivers, follow this procedure:

Have all of the transmitters or transceivers at hand (when one is programmed, all others are erased).

Step 1 Turn the vehicle’s ignition “on”.

Step 2 Within 5 seconds of turning "on" the ignition, press the Valet Switch 5 times. The siren will chirp once, confirming that the system is ready to learn a transmitter.

Step 3 Within 10 seconds press and release the “Arm/Lock” button (the “locked padlock” graphic). The siren will chirp once, confirming that the system learned the transmitter.

Step 4 Repeat the previous step for each transmitter or transceiver which is to operate the system.

Only the “Arm/Lock” button is pressed in programming; when it is learned all of the other buttons’ functions are automatically assigned. The system will remove itself from the programming mode if 10 seconds expire without its receiving a signal, if the ignition is turned “off”, or upon four transmitters or transceivers being programmed into the system.

Please note that programming a transmitter to the system will activate the audible Unauthorized Transmitter Alert warning and the extended Status Light

Page 6

Page 43

Image 8
Contents 850i4e Inside Front Cover Inside Back Cover PRINTER’S Note Table of Contents Second Arming Delay Ignition-Activated Vehicle RecoveryDoor-Activated Vehicle Recovery #31 Turbo TimerOther Omega Echo Notes Features Programming ChecklistAbout Your NEW Crime Guard System Press and release Press and release the P buttonPress and release the .. button Press and releaseProgramming the Echo Transceiver Functions Press and release ButtonAfter 5 seconds the Echo chirps twice release the P button ButtonUsing Your Crime Guard System Programming Transmitters Or Echo TransceiversThere are three methods of Arming the security system Upon Arming the System willFeature #30 Feature #31 Turbo TimerLast Door Arming by Exiting the CAR Upon Arming with the Echo Transceiver, it willFeature #28 Feature #29 Tach Wire or Tachless Starter OperationSystem Armed & Activated Feature #26 Total Closure Lock OutputFeature #27 Gasoline Or Diesel Engine Disarming the System Feature #24Door Lock/Unlock Pulse DurationFeature #25 Double Unlock Pulse Feature #22 Soft or Loud Horn Confirmation Chirps Feature #23 Or 2 Button Arming / DisarmingFeature #19 Steady/Flashing Lights During Remote Start Feature #20Feature #21 Steady Siren or Pulsed Horn Output Automatic RearmingFeature #17 Chirp Confirmation Feature #18 Remote Start Run Time 10 Or 20 MinutesTo Disarm the System without using a Transmitter Disarming by Emergency OverrideEnhanced Remote Panic To Activate Enhanced Remote PanicFeature #11 Open Door Bypass Of Ignition Locking Feature #12 Doors Lock With Last Door ArmingFeature #13 Doors Lock With Automatic Rearm Auxiliary OutputsTo Activate Auxiliary Output #2 To Activate Auxiliary Output #3Silent Arming and Disarming Glass Breakage & 2-ZONE Impact SensorRemote Sensor Bypass Remote Engine StartingFeature #1 SecureCode Factory Default Setting 1 PressHow to custom program a new SecureCode To Activate Remote StartingTo Exit Programing Mode To Change a FeatureTo Access and Change further Features To Enter Programing Mode To Access a FeatureVehicle Recovery Level #2 Vehicle Recovery activated by an open doorAlarm Valet & Starting Valet Modes Alarm Valet ModeStatus Indicator Light To enter Alarm Valet ModeTo Enter Starting Valet Mode To Enter both Modes Full Valet Mode

850i specifications

The Omega Vehicle Security 850i is a cutting-edge vehicle security system designed to provide robust protection against theft and unauthorized access. Known for its blend of innovative technologies and user-friendly features, the 850i stands out in the crowded market of automotive security solutions.

One of the primary features of the Omega 850i is its two-way remote communication system. This technology allows vehicle owners to receive real-time alerts about their vehicle's status. The remote offers a range of up to one mile, enabling users to lock, unlock, and control their vehicle from a distance. Additionally, the system includes a built-in panic button, which can be activated in emergencies to alert those nearby and deter potential threats.

The 850i is equipped with advanced technologies such as a shock sensor, which detects any impact or tampering. This feature is crucial for ensuring that even minor disturbances are addressed promptly, providing peace of mind to vehicle owners. Furthermore, the system includes a hood and door sensor, which monitors unauthorized entry attempts, further enhancing its protective capabilities.

Another notable characteristic of the Omega 850i is its programmable settings. Users can customize various functions, such as the sensitivity level of the shock sensor and the duration of the siren, allowing for a tailored security experience that meets individual preferences. The system is also capable of integrating with other security devices, creating a comprehensive security ecosystem for the vehicle.

The 850i also incorporates a dedicated lifetime warranty, signaling the brand's commitment to quality and customer satisfaction. This assurance is crucial for vehicle owners looking to invest in a long-term security solution. Additionally, the installation process is straightforward, and many users appreciate the option of professional installation to ensure the system functions optimally.

Overall, the Omega Vehicle Security 850i is an excellent choice for anyone seeking a reliable and feature-rich vehicle security system. With its two-way communication, advanced sensors, and customizable features, it offers exceptional protection that adapts to the evolving landscape of vehicle theft and safety demands. Whether for personal vehicles, commercial fleets, or premium automobiles, the 850i consistently delivers confidence and security to drivers everywhere.