Hamilton Beach 62650, 840163800 manual Using Your Mixer, To Insert Attachments

840163800 ENv03.qxd 4/10/07 2:51 PM Page 5

To Insert Attachments

Flat Beaters, Straight Wire Beaters and Whisk

1.Make sure mixer is unplugged and speed control is set to OFF.

2.Insert a beater or attachment into an opening on the bottom of the mixer. Push

until it clicks into place. Repeat with other beater or attachment.

Twisted Wire Beaters and Dough Hooks

1.Insert the wire beater or the dough

Collar	hook with the
	collar into the
	opening indi-
	cated by the
	illustration on
	the mixer.

2.Align tabs on the beater or dough

	Slot	hook with the
Tab		slots in the
		opening. Push
		until it clicks
		into place.
		Repeat with
		other beater or
		dough hook.

Using Your Mixer

1.Make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters.

2.Plug mixer into electrical outlet. Place beaters into bowl.

3.Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary.

4.When finished mixing, move the speed control to 0 (OFF) and unplug mixer.

5.To eject beaters, push straight down on the eject button.

5