Self Adjusting Brake Adjuster
The description and specifications contained in this service publication are current at the time of printing.
Bendix Spicer Foundation Brake LLC reserves the right to discontinue or modify its models and/or procedures and to change specifications at any time without notice.
Any reference to brand name in this publication is made as an example of the types of tools and materials recommended for use and should not be considered an endorsement. Equivalents may be used.
IMPORTANT NOTICE
This symbol is used throughout this manual to call attention to procedures where carelessness or failure to follow specific instructions may result in personal injury and/or component damage.
Departure from the instructions, choice of tools, materials and recommended parts mentioned in this publication may jeopardize the personal safety of the service technician or vehicle operator.
NOTE: A properly working Automatic Slack Adjuster does not require manual adjustment while in service. The manual adjuster hex is intended for use during adjuster installation and brake overhaul. WARNING: Automatic slack adjusters should not be repeatedly adjusted to correct excessive in service pushrod stroke, because this condition indicates that a problem exists with the automatic adjuster, with the installation of the adjuster or with related foundation brake components which manual adjustment will not correct.
WARNINGS: FAILURE TO FOLLOW INDICATED PROCEDURES CREATES A HIGH RISK OF PERSONAL INJURY TO THE SERVICING TECHNICIAN.
Caution: Failure to follow indicated procedures may cause component damage or malfunction.
Note: Additional service information not covered in the service procedures.
Tip: Helpful removal and installation procedures to aid in the service of this unit.
Always use genuine Spicer® replacement parts.
1