BENDIX SD-08-2418 manual General Safety Guidelines

Page 2

GENERAL SAFETY GUIDELINES

WARNING! PLEASE READ AND FOLLOW THESE INSTRUCTIONS

TO AVOID PERSONAL INJURY OR DEATH:

When working on or around a vehicle, the following guidelines should be observed AT ALL TIMES:

▲Park the vehicle on a level surface, apply the parking brakes and always block the wheels. Always wear personal protection equipment.

▲Stop the engine and remove the ignition key when working under or around the vehicle. When working in the engine compartment, the engine should be shut off and the ignition key should be removed. Where circumstances require that the engine be in operation, EXTREME CAUTION should be used to prevent personal injury resulting from contact with moving, rotating, leaking, heated or electrically-charged components.

▲Do not attempt to install, remove, disassemble or assemble a component until you have read, and thoroughly understand, the recommended procedures. Use only the proper tools and observe all precautions pertaining to use of those tools.

▲If the work is being performed on the vehicle’s air brake system, or any auxiliary pressurized air systems, make certain to drain the air pressure from all reservoirs before beginning ANY work on the vehicle. If the vehicle is equipped with a Bendix® AD-IS®air dryer system, a Bendix® DRM™ dryer reservoir module, or a Bendix® AD-9si™air dryer, be sure to drain the purge reservoir.

▲Following the vehicle manufacturer ’s recommended procedures, deactivate the electrical system in a manner that safely removes all electrical power from the vehicle.

▲Never exceed manufacturer’s recommended pressures.

▲Never connect or disconnect a hose or line containing pressure; it may whip. Never remove a component or plug unless you are certain all system pressure has been depleted.

▲Use only genuine Bendix® brand replacement parts, components and kits. Replacement hardware, tubing, hose, fittings, etc. must be of equivalent size, type and strength as original equipment and be designed specifically for such applications and systems.

▲Components with stripped threads or damaged parts should be replaced rather than repaired. Do not attempt repairs requiring machining or welding unless specifically stated and approved by the vehicle and component manufacturer.

▲Prior to returning the vehicle to service, make certain all components and systems are restored to their proper operating condition.

▲For vehicles with Automatic Traction Control (ATC), the ATC function must be disabled (ATC indicator lamp should be ON) prior to performing any vehicle maintenance where one or more wheels on a drive axle are lifted off the ground and moving.

▲The power MUST be temporarily disconnected from the radar sensor whenever any tests USING A DYNAMOMETER are conducted on a Bendix® Wingman® Advanced™-equipped vehicle.

▲You should consult the vehicle manufacturer's operating and service manuals, and any related literature, in conjunction with the Guidelines above.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SD-08-2418 General Safety Guidelines Description Charge Cycle Refer to Figure Purge Cycle Refer to Figure Preventive Maintenance Heater and Thermostat Connector General Braking System Protection Delivery Check Valve Cleaning Procedure Log-on and Learn from the Best Page Symptom Cause Remedy Replace the safety valve Refer to paragraph 5 of the Operation and Leakage Tests for Symptom Cause Remedy

SD-08-2418 specifications

The BENDIX SD-08-2418 is a sophisticated air brake system designed for heavy-duty trucks and commercial vehicles. This unit is widely recognized for its reliability and performance in demanding driving conditions. Engineered to enhance safety and control, the SD-08-2418 is particularly popular among fleet operators and vehicle manufacturers.

One of the main features of the BENDIX SD-08-2418 is its advanced modulation technology, which allows for optimal brake application and release. This technology ensures a smooth and controlled braking experience, reducing the risk of wheel lock-up and ensuring that drivers maintain steering control during hard stops. This is crucial for maintaining safety when operating large vehicles under heavy loads.

The SD-08-2418 also incorporates a lightweight design, which contributes to improved fuel efficiency and overall vehicle performance. The unit is constructed from high-quality materials that not only reduce weight but also enhance durability and longevity. This is vital for trucks that endure rigorous use across varied terrains and conditions.

Another notable characteristic of the BENDIX SD-08-2418 is its compatibility with advanced electronic braking systems (EBS). This compatibility allows for efficient integration with modern vehicle technologies such as anti-lock braking systems (ABS) and traction control systems. By enabling the seamless exchange of information between the braking system and vehicle control units, the SD-08-2418 enhances the overall safety and performance of the truck.

Moreover, the BENDIX SD-08-2418 features a user-friendly installation process, which is essential for minimizing downtime during maintenance. Its straightforward design allows technicians to replace or service the unit with ease. This reduces operational costs and promotes efficient fleet management.

In conclusion, the BENDIX SD-08-2418 is a state-of-the-art air brake system that combines advanced features, reliable performance, and ease of installation. Its innovative technology and lightweight design make it a top choice for commercial vehicle operators who prioritize safety, efficiency, and durability in their braking systems. As the demands on modern vehicles evolve, the BENDIX SD-08-2418 remains a key player in the field of heavy-duty braking solutions.
Top Page Image Contents