ASRock 960GC-GS FX manual OC Tweaker Screen

3.3 OC Tweaker Screen

In the OC Tweaker screen, you can set up overclocking features.

BIOS SETUP UTILITY

Main OC Tweaker Advanced H/W Monitor Boot Security Exit

CPU Configuration

Overclock Mode	[Auto]
CPU Frequency (MHz)	[400]
PCIE Frequency (MHz)	[100]
Spread Spectrum	[Auto]
Boot Failure Guard	[Enabled]
Boot Failure Guard Count	[3]
Advanced Clock Calibration	[Disabled]
Processor Maximum Frequency	x31.5 6300 MHZ
North Bridge Maximum Frequency	x31.0 6200 MHz
Processor Maximum Voltage	1.5500 V
Multiplier/Voltage Change	[Auto]
HT Bus Speed	[Auto]
HT Bus Width	[Auto]
Memory Configuration
Memory Clock	[Auto]

Overclocking may cause damage to your CPU and motherboard.

It should be done at your own risk and expense.

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

CPU Configuration

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Configura- tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Opti- mized].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency.

Spread Spectrum

This feature will be set to [Enabled] as default. Configuration options: [Disabled] and [Enabled].

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Advanced Clock Calibration

This allows you to adjust Advanced Clock Calibration feature. The default valueis [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and [PerCore]. If you select [All Cores], you will see the option “Value (All Cores)”.Configuration options: [+12%] to [-12%]. If you select [Per Core], you will seethe options “Value (Core 0)”, “Value (Core 1)”, “Value (Core 2)” and “Value(Core 3)”. Configuration options: [+12%] to [-12%].

Processor Maximum Frequency

It will display Processor Maximum Frequency for reference.

34