![](/images/new-backgrounds/1151920/15192095x1.webp)
3.3.2 Chipset Configuration |
|
| |
BIOS SETUP UTILITY |
|
| |
Advanced |
|
|
|
Chipset Configuration |
| ENABLE: Allow | |
|
| ||
Memory Remap Feature | [Disabled] | remapping of | |
DRAM Frequency | [Auto] | overlapped PCI memory | |
Flexibility Option | [Disabled] | above the total | |
DRAM CAS# Latency | [Auto] | physical memory. | |
DRAM RAS# to CAS# Delay | [Auto] |
|
|
DRAM RAS# Precharge | [Auto] | DISABLE: Do not allow | |
DRAM RAS# Activate to Precha [Auto] | remapping of memory. | ||
Primary Graphics Adapter | [PCI] |
|
|
OnBoard HD Audio | [Auto] |
| Select Screen |
Front Panel | [Auto] |
| Select Item |
OnBoard Lan | [Enabled] | + - | Change Option |
|
| F1 | General Help |
CPU Voltage | [Auto] | F9 | Load Defaults |
DRAM Voltage | [Auto] | F10 | Save and Exit |
NB Core Voltage | [Auto] | ESC | Exit |
v02.54 (C) Copyright |
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)] for DDR2 memory modules, or select [400MHz (DDR3 800)], [533MHz (DDR3 1066)] or [667MHz (DDR3 1333)] for DDR3 memory modules. The configura- tion options depend on the CPU and memory module you adopt on this motherboard. Please refer to page 8 for the CPU FSB frequency and its corre- sponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration options for DDR2 memory modules are [3], [4], [5], [6] and [Auto]. Configuration options for DDR3 memory modules are are [5], [6], [7], [8], [9] and [Auto].
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the read / write command. Configuration options: [Auto], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].
DRAM RAS# Precharge
This controls the idle clocks after a precharge command is issued. Configuration options: [Auto], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks] and [6 DRAM Clocks].
48