ASRock 4CORE1600TWINS-P35D Boot Screen, CPU Quiet Fan, Target CPU Temperature C, Tolerance C

Page 57

CPU Quiet Fan

This item allows you to identify the temperature of CPU fan. If you set this option as [Disabled], the CPU fan will operate in full speed. If you set this option as [Enabled], you will find the items “Target CPU Temperature

( C)”, “Tolerance ( C)”, and “Minimun Fan Speed” appear to allow you adjusting them. The default value is [Disabled]. You are allowed to enable this function only when you install 4-pin CPU fan.

Target CPU Temperature ( C)

The target temperature will be between 45 C and 65 C. The default value is [50].

Tolerance ( C)

The default value of tolerance is [2], which means the error of the target CPU temperature will be within 2 C.

Target Fan Speed

Use this option to set the target fan speed. You can freely adjust the target fan speed according to the target CPU temperature that you choose. Configuration options: [Level 1], [Level 2], [Level 3], [Level 4], [Level 5], [Level 6] [Level 7], [Level 8] and [Level 9].

3.5 Boot Screen

In this section, it will display the available devices on your system for you to config- ure the boot settings and the boot priority.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security Exit

Boot Settings

Boot Settings Configuration

1st Boot Device

[1st Floppy Device]

2nd Boot Device

[HDD: PM - HDS722580VL]

3rd Boot Device

[CD / DVD: 3S - CD - ROM C]

4th Boot Device

[USB]

Hard Disk Drives

 

Removable Drives

 

CD/DVD Drives

 

Configure Settings during System Boot.

 

Select Screen

 

Select Item

Enter

Go to Sub Screen

F1

General Help

F9

Load Defaults

F10

Save and Exit

ESC

Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents 4Core1600Twins-P35D Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Bios Feature ConnectorUnique Feature Support CDPage Page CPU RoHS Motherboard LayoutASRock 8CHeSATAII I/O Plus LAN Port LED IndicationsTable for Audio Output Connection Screw Holes Pre-installation PrecautionsCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Yellow Slot Orange Slot Memory modulesGreen Slot Memory modules Page Installing a Dimm Expansion Slots PCI, PCI Express, and AGI Express Slots Installing an expansion cardCrossFireTM Operation Guide AGI Express slot PCI ExpressWhat graphics cards work with CrossFireTM? Enjoy the benefit of CrossFireTMCrossFireTM Bridge Install the required drivers to your system For Windows XP OSFor Windows VistaTM OS Surround Display Feature You can freely enjoy the benefit of CrossFireTM feature\ Surround Display Information PS2USBPWR1 Jumpers SetupFSB1 Jumper 12DefaultFSB2 Jumper FSB3 JumperFDD connector Onboard Headers and ConnectorsPrimary IDE connector Blue Connect the black endConnector on this motherboard ESATAII Connector This eSATAII connectorConnector and eSATAII ConnectorDeskExpress Hot Plug Detection HeaderIRTX Internal Audio ConnectorsSystem Panel Header ATX Power ConnectorATX 12V Power Connector Hdmispdif Header Connection Guide Install Hdmi VGA card driver to your systemESATAII Interface Introduction What is eSATAII?Page Ieee 400Mb/s USB 480Mb/s 5Gb/s 1500Mb/sESATAII/SATAII 0Gb/s 3000Mb/s Sataii Hard Disk Setup Guide Sataii hard disk may fail to run at Sataii modeWestern Digital Hot Plug Function for Sata / Sataii HDDs and eSATAII Devices What is Hot Plug Function?Points of attention, before you process the Hot Plug Sata / Sataii HDD Hot Plug Feature and Operation GuideHow to Hot Unplug a Sata / Sataii HDD How to Hot Plug a Sata / Sataii HDDSataii as, please set the option to Ahci Driver Installation GuideMake a Sata / Sataii Driver Diskette Drivers into the floppy disketteInstall Windows 2000 / XP / XP 64-bit OS on your system Install Windows VistaTM / VistaTM 64-bit OS on your systemSataii as, please set the option to IDE Untied Overclocking Technology Bios Menu Bar Main Screen Navigation KeysTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondCPU Configuration Monitor Boot Security ExitAdvanced Screen MainCPU Configuration Intel R Virtualization tech Enhance Halt StateCPU Thermal Throttling No-Excute Memory ProtectionDram RAS# to CAS# Delay Memory Remap FeatureDram Frequency Flexibility OptionDram RAS# Activate to Precharge Dram Rcomp SettingPrimary Graphics Adapter OnBoard HD AudioAcpi Configuration Sataii Configuration Enhanced Sataii ConfigurationAcpi Hpet Table V02.54 C Copyright 1985-2003, American Megatrends, IncLBA/Large Mode IDE Device ConfigurationPIO Mode Block Multi-Sector TransferPCIPnP Configuration Super IO Configuration Floppy ConfigurationOnBoard Floppy Controller Serial Port AddressECP Mode DMA Channel Parallel Port ModeParallel Port Address EPP VersionHardware Health Event Monitoring Screen Use this item to enable or disable the USB 2.0 supportUSB Controller USB 2.0 SupportTarget CPU Temperature C Boot ScreenCPU Quiet Fan Tolerance CBoot From Onboard LAN Boot Settings ConfigurationBoot Up Num-Lock Security ScreenExit Screen Load Optimal DefaultsSave Changes and Exit Discard Changes and ExitSupport CD Information Install Operating SystemRunning The Support CD Drivers Menu

4CORE1600TWINS-P35D specifications

The ASRock 4CORE1600TWINS-P35D motherboard is a powerful and versatile option designed for enthusiasts looking to build a robust Intel-based system. Aimed primarily at gamers and power users, the motherboard features the Intel P35 chipset, which supports a variety of Intel processors, including the Core 2 Duo and Core 2 Quad series. This compatibility allows users to achieve high performance, making it an excellent choice for both gaming and everyday computing tasks.

One of the standout features of the ASRock 4CORE1600TWINS-P35D is its support for dual-channel DDR2 memory. It can accommodate up to 8GB of RAM, providing ample memory capacity for multitasking and demanding applications. The motherboard supports memory speeds of up to 800 MHz, enabling quick data processing and smoother performance during memory-intensive tasks. Moreover, the board is equipped with four DIMM slots, allowing for flexible memory configuration and future upgrades.

The ASRock 4CORE1600TWINS-P35D also boasts an impressive set of expansion slots, including PCI Express x16 slots, which are crucial for modern graphics cards. This feature enables users to take advantage of cutting-edge graphics technology, essential for gaming and graphic design applications. Additionally, the motherboard includes several PCI slots for older hardware, ensuring compatibility with a wide range of peripherals.

For storage, the motherboard provides multiple SATA ports with support for RAID configurations, facilitating enhanced data redundancy and performance. The ASRock 4CORE1600TWINS-P35D supports both SATA II and SATA I devices, catering to various storage needs. Its integrated Gigabit Ethernet controller also ensures fast and reliable network connectivity for online gaming and data transfers.

Furthermore, the motherboard includes a comprehensive list of connectivity options, including USB 2.0 ports, a parallel port, and audio jacks, making it easy to connect peripherals and external devices. Its onboard audio provides decent sound quality, enhancing the overall user experience.

In terms of design, the ASRock 4CORE1600TWINS-P35D features a user-friendly BIOS interface that allows users to tweak performance settings, monitor system health, and configure hardware options easily. The layout of the motherboard is designed to maximize airflow and keep components cool, promoting reliability during high-performance tasks.

In summary, the ASRock 4CORE1600TWINS-P35D is a feature-rich motherboard that caters to various user needs, from gaming to productivity. With its robust chipset, memory support, and numerous expansion options, it remains a solid choice for those looking to build a reliable and powerful Intel-based system.
Top Page Image Contents