ASRock E3C224 manual Radius Settings, Radius Authentication, Port, Time Out, Server Address

Page 35

2.5.13 RADIUS Settings

To enable/disable RADIUS, check or uncheck the “RADIUS Authentication” Enable checkbox respectively.

NOTE: Generic FreeRADIUS alone is supported.

RADIUS Authentication

Check the option ‘Enable’ to enable RADIUS authentication.

Port

Specify the RADIUS Port.

•- The default Port is 1812.

•- Port value ranges from 1 to 65535.

Time Out

Specify the Time out value.

•- The default Time out value is 3 seconds.

•- Time out value ranges from 3 to 300.

Server Address

Enter the ‘IP address’ of the RADIUS server

•- An IP Address is made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.

Image 35

Contents Ipmi Configuration Guide Introduction of Megarac SP Megarac SP GUI Overview LoginDashboard Event Logs Board Information Field Replaceable Unit FRUBasic Information Chassis InformationProduct Information View this Event Log Server HealthSensor Readings Live WidgetUTC Offset Event LogBMC Timezone Client TimezoneAudit Log System and Audit LogSystem Log Add Role Group ConfigurationActive Directory Settings Advanced SettingsDelete Role Group Host Name DNS Server SettingsHost configuration Host Settings Domain Name Configuration Domain SettingsIP Priority Domain Name Server Configuration DNS Server SettingsReset Domain NameCircular Event Log Policy System Event LogCurrent Event Log Policy Linear Event Log PolicyReplace Image Images RedirectionStart/Stop Redirection Add ImageDelete Image LDAP/E-Directory Settings Delete Role Group Other Mouse mode Mouse Mode SettingsRelative Mouse mode Absolute Mouse modeClick ‘Save’ to save any changes made IPv4 Address, Subnet Mask, Default Gateway Network SettingsLAN Settings IPv4 ConfigurationVlan Configuration IPv6 ConfigurationIPv6 Settings Default GatewayReset Network Bonding Network Bonding ConfigurationDefault Interfaces Auto ConfigurationClick Save to save the current changes Link Speed Network Link ConfigurationDuplex Mode Auto NegotiationClick ‘Save’ to save the settings NTP Server NTP SettingsDate TimeRefresh Automatically synchronizeMove Down PAM OrderingPAM Module Move UpReset LAN Destination PEF ManagementEvent Filter Alert PolicyDelete Send Test AlertAdd ModifyTime Out Radius SettingsRadius Authentication PortSecret Virtual Media Attach Mode Configure Remote SessionServices Machine Name Smtp SettingsLAN Channel Number Sender AddressSecondary Smtp Server Smtp Server requires AuthenticationPassword UsernameClick ‘Save’ to save the new Smtp server configuration Current Privacy Key SSL Certificate ConfigurationCurrent Certificate New CertificatePage Rotate Count System and Audit Log SettingsLog Type File SizeCheck the option Enable to enable audit log Delete User User ManagementAdd User Modify UserHard disk devices Virtual Media DevicesFloppy devices CD/DVD devicesJava Console Remote ControlConsole Redirection Power Off Server Orderly Shutdown Power Control and StatusReset Server Power Off Server ImmediateJava SOL Event List Triggers ConfigurationAuto Video Recording Download Video RecordingPlay Video Check All MaintenancePreserve Configuration Configuration listRestore Factory Defaults Password, Confirm Password System AdministratorUser Access Change PasswordReset Enter Update Mode Firmware UpdateFirmware Update Enter Preserve ConfigurationRetry Count Image Transfer ProtocolProtocol Type Source PathReset

Related manuals

Manual 87 pages 40.28 Kb