ASRock 970 Pro2 manual Command Rate, Chipset Settings NB Voltage, SB Voltage, +1.8V Power Voltage

Page 37

TRAS

Use this item to change TRAS Auto/Manual setting. The default is [Auto].

Command Rate

Use this item to change Command Rate Auto/Manual setting. The default is [Auto].

TRC

Use this item to change TRC Auto/Manual setting. The default is [Auto].

TWR

Use this item to change TWR Auto/Manual setting. The default is [Auto].

TRFC

Use this item to change TRFC Auto/Manual setting. The default is [Auto].

TRRD

Use this item to change TRRD Auto/Manual setting. The default is [Auto].

TWTR

Use this item to change TWTR Auto/Manual setting. The default is [Auto].

TRTP

Use this item to change TRTP Auto/Manual setting. The default is [Auto].

TFAW

Use this item to change TFAW Auto/Manual setting. The default is [Auto].

TCWL

Use this item to change TCWL Auto/Manual setting. The default is [Auto].

Chipset Settings

NB Voltage

Use this to select NB Voltage. The default value is [Auto].

SB Voltage

Use this to select SB Voltage. The default value is [Auto].

+1.8V Power Voltage

Use this to select +1.8V Power Voltage. The default value is [Auto].

+1.4V Voltage

Use this to select +1.4V Voltage. The default value is [Auto].

Would you like to save current setting user defaults?

In this option, you are allowed to load and save three user defaults according to your own requirements.

37

Image 37
Contents 970 Pro2 Disclaimer Copyright NoticeContents Bios Setup Utility Introduction Package ContentsSpecifications Bios Feature ConnectorSupport CD HardwarePage ASRock Instant Boot Unique FeaturesASRock OC Tuner ASRock Intelligent Energy SaverASRock APP Charger ASRock OC DNAASRock XFast USB ASRock XFast LANASRock XFast RAM Socket Motherboard LayoutLAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmNotch break Break Installing a DimmExpansion Slots PCI and PCI Express Slots Installing an expansion cardPcie Slots Description Jumpers SetupSATAII6 Onboard Headers and ConnectorsSerial ATA Sata Data Cable System Panel Header CPU Fan Connectors ATX 12V Power Connector ATX Power ConnectorWhat is Hot Plug Function? Serial ATA2 SATA2 Hard Disks InstallationWhat is Hot Swap Function? Points of attention, before you process the Hot Plug Sata / SATA2 HDD Hot Plug Feature and Operation GuideHow to Hot Unplug a Sata / SATA2 HDD How to Hot Plug a Sata / SATA2 HDDInstalling Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Bios Make a Sata / SATA2 Driver DisketteUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Introduction Bios Menu BarMain Screen Navigation KeysTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondOC Tweaker Screen Processor Maximum Frequency AMD C-State SupportNorth Bridge Maximum Frequency Processor Maximum VoltagePower Down Enable Memory Configuration Memory ClockHT Bus Width Dram FrequencyChipset Settings NB Voltage Command Rate+1.8V Power Voltage Would you like to save current setting user defaults?Advanced Screen CPU ConfigurationInstant Flash Cool ‘n’ Quiet CPU ConfigurationSecure Virtual Machine Enhance Halt State C1EOnboard HD Audio Chipset ConfigurationFront Panel Onboard LanAcpi Configuration Acpi Hpet table Sata Operation Mode Storage ConfigurationSata IDE Combined Mode Onboard Sata Controller EnabledPCI Latency Timer PCIPnP ConfigurationLatency Timer PCI IDE BusMasterFloppy a Floppy ConfigurationSuper IO Configuration USB Configuration Chassis Fan 1 Setting CPU Fan SettingHardware Health Event Monitoring Screen Boot Settings Configuration Boot ScreenSecurity Screen Change Supervisor PasswordExit Screen Support CD Information Install Operating SystemRunning The Support CD Drivers Menu
Related manuals
Manual 66 pages 15.11 Kb