ASRock 970 Pro2 manual USB Configuration

Page 47

3.4.8 USB Configuration

BIOS SETUP UTILITY

 

 

Advanced

 

 

 

USB Configuration

 

To enable or disable

 

 

the onboard USB

USB Controller

[Enabled]

controllers.

 

 

USB 2.0 Support

[Enabled]

 

 

Legacy USB Support

[Enabled]

 

 

USB Keyboard/Remote Power On

[Disabled]

 

 

USB Mouse Power On

[Disabled]

 

 

 

 

 

Select Screen

 

 

 

Select Item

 

 

+-

Change Option

 

 

F1

General Help

 

 

F9

Load Defaults

 

 

F10

Save and Exit

 

 

ESC

Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this option to enable or disable support for USB 2.0 devices. The de- fault value is [Enabled].

Legacy USB Support

Use this option to select legacy support for USB devices. There are four confi guration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only]. The default value is [Enabled]. Please refer to below descriptions for the details of these four options:

[Enabled] - Enables support for legacy USB.

[Auto] - Enables legacy support if USB devices are connected.

[Disabled] - USB devices are not allowed to use under legacy OS and BIOS setup when [Disabled] is selected. If you have USB compatibility is- sue, it is recommended to select [Disabled] to enter OS.

[BIOS Setup Only] - USB devices are allowed to use only under BIOS setup and Windows / Linux OS.

USB Keyboard/Remote Power On

Use this item to enable or disable the system to wake from S5 using USB Keyboard/Remote.

USB Mouse Power On

Use this item to enable or disable the system to wake from S5 using USB Mouse.

47

Image 47
Contents 970 Pro2 Disclaimer Copyright NoticeContents Bios Setup Utility Introduction Package ContentsSpecifications Hardware ConnectorBios Feature Support CDPage ASRock Intelligent Energy Saver Unique FeaturesASRock Instant Boot ASRock OC TunerASRock XFast LAN ASRock OC DNAASRock APP Charger ASRock XFast USBASRock XFast RAM Socket Motherboard LayoutLAN Port LED Indications I/O PanelPre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmNotch break Break Installing a DimmPcie Slots Installing an expansion cardExpansion Slots PCI and PCI Express Slots Description Jumpers SetupSATAII6 Onboard Headers and ConnectorsSerial ATA Sata Data Cable System Panel Header CPU Fan Connectors ATX 12V Power Connector ATX Power ConnectorWhat is Hot Swap Function? Serial ATA2 SATA2 Hard Disks InstallationWhat is Hot Plug Function? Points of attention, before you process the Hot Plug Sata / SATA2 HDD Hot Plug Feature and Operation GuideHow to Hot Unplug a Sata / SATA2 HDD How to Hot Plug a Sata / SATA2 HDDMake a Sata / SATA2 Driver Diskette Driver Installation GuideInstalling Windows XP / XP 64-bit With RAID Functions Set up BiosUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Untied Overclocking Technology Introduction Bios Menu BarSystem Time HourMinuteSecond Navigation KeysMain Screen To jump to the Exit Screen or exit the current screenOC Tweaker Screen Processor Maximum Voltage AMD C-State SupportProcessor Maximum Frequency North Bridge Maximum FrequencyDram Frequency Memory Configuration Memory ClockPower Down Enable HT Bus WidthWould you like to save current setting user defaults? Command RateChipset Settings NB Voltage +1.8V Power VoltageInstant Flash CPU ConfigurationAdvanced Screen Enhance Halt State C1E CPU ConfigurationCool ‘n’ Quiet Secure Virtual MachineOnboard Lan Chipset ConfigurationOnboard HD Audio Front PanelAcpi Configuration Acpi Hpet table Onboard Sata Controller Enabled Storage ConfigurationSata Operation Mode Sata IDE Combined ModePCI IDE BusMaster PCIPnP ConfigurationPCI Latency Timer Latency TimerFloppy a Floppy ConfigurationSuper IO Configuration USB Configuration Hardware Health Event Monitoring Screen CPU Fan SettingChassis Fan 1 Setting Boot Settings Configuration Boot ScreenSecurity Screen Change Supervisor PasswordExit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CD
Related manuals
Manual 66 pages 15.11 Kb